Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

RV-8 Baggage Door Ribs

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV-List
View previous topic :: View next topic  
Author Message
kenbrooks(at)charter.net
Guest





PostPosted: Fri Aug 16, 2013 5:46 pm    Post subject: RV-8 Baggage Door Ribs Reply with quote

Has anyone else encountered a problem with the forward (right side) baggage door rib - F-873B- being too short to capture the last hole in the pre-punched outside door skin? I plan to plug the hole with a rivet, but it won't catch the rib at all. I started from the other end of the door that meets the fuselage skin and clamped, drilled and clecoed the skin to the two ribs, but was somewhat dismayed that the right rib even looked short and didn't capture the last rivet hole. Perhaps I'll see that it doesn't matter once I get everything else on the door fitted and drilled. I'm not sure a photo will show up on the list digest, but I'm attaching one anyway.

- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List



Short_Rib.jpg
 Description:
 Filesize:  525.09 KB
 Viewed:  1785 Time(s)

Short_Rib.jpg


Back to top
bifft(at)xmission.com
Guest





PostPosted: Fri Aug 16, 2013 7:44 pm    Post subject: RV-8 Baggage Door Ribs Reply with quote

Quoting Ken Brooks <kenbrooks(at)charter.net>:

Quote:
Has anyone else encountered a problem with the forward (right side)
baggage door rib - F-873B- being too short to capture the last hole
in the pre-punched outside door skin? I plan to plug the hole with
a rivet, but it won't catch the rib at all. I started from the
other end of the door that meets the fuselage skin and clamped,
drilled and clecoed the skin to the two ribs, but was somewhat
dismayed that the right rib even looked short and didn't capture the
last rivet hole. Perhaps I'll see that it doesn't matter once I
get everything else on the door fitted and drilled. I'm not sure a
photo will show up on the list digest, but I'm attaching one anyway.

Where does the other end line up? I just checked mine and the top

rivet doesn't go into that rib, but instead into some angle that is
also riveted to the hinge.

Brian Huffaker, DSWL (bifft(at)xmission.com)
RV-8A Attaching cowl


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
Michael Wynn



Joined: 10 Jan 2006
Posts: 148
Location: San Ramon, CA

PostPosted: Mon Aug 19, 2013 6:10 am    Post subject: RV-8 Baggage Door Ribs Reply with quote

Hi Ken

I am quite sure there were no excess holes in the door. I built it twice, having fouled up the first try--couldn't get it to settle in the right position to seal properly. I would suggest a careful review of how the door is assembled. I would bet dimes to doughnuts that you either have a piece missing or something mis-aligned.

Regards,

Michael Wynn
RV8 Finishing
San Ramon, CA

In a message dated 8/16/2013 6:49:03 P.M. Pacific Daylight Time, kenbrooks(at)charter.net writes:
Quote:
Has anyone else encountered a problem with the forward (right side) baggage door rib - F-873B- being too short to capture the last get it hole in the pre-punched outside door skin? I plan to plug the hole with a rivet, but it won't catch the rib at all. I started from the other end of the door that meets the fuselage skin and clamped, drilled and clecoed the skin to the two ribs, but was somewhat dismayed that the right rib even looked short and didn't capture the last rivet hole. Perhaps I'll see that it doesn't matter once I get everything else on the door fitted and drilled. I'm not sure a photo will show up on the list digest, but I'm attaching one anyway.


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List



ShortRib.jpg
 Description:
 Filesize:  525.09 KB
 Viewed:  1774 Time(s)

ShortRib.jpg



_________________
Michael Wynn
RV 8
San Ramon, CA
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group