Matronics Email Lists :: View topic - Getting wires into the engine plenum (through the baffles)

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Getting wires into the engine plenum (through the baffles)

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

donjohnston

Joined: 13 Dec 2009
Posts: 231

Posted: Fri Sep 13, 2013 4:51 am Post subject: Getting wires into the engine plenum (through the baffles)

What's the best way to get the various sensor wires (fuel press, fuel flow, etc.) from the engine to the firewall?



Passing them through a small hole with a grommet seems the easiest.  But that would require cutting and re-terminating the wire if sheet metal ever has to come off (not that that's a common task). 



There's a ton of "pass-through" style connectors, but that adds three new contact points in the line. 



Just wondering what's... typical. 



-Don

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum