Matronics Email Lists :: View topic - ULPowered Europa cleared for flight

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

ULPowered Europa cleared for flight

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

groups(at)thegoddards.com
Guest

Posted: Mon Sep 30, 2013 2:05 pm Post subject: ULPowered Europa cleared for flight

Today BWUP the first UL260iS powered Europa was cleared for flight testing by the LAA. Hopefully if the weather is favourable BWUP should take to the air on Sunday. Thanks goes to the following for all their help, support and guidance:

Mark Jones, Galaxy UL engines for the UL260iS

Ian Rickard, for all those cad drawings and his support getting the project going

ULPower, for the engine mount using Ian's drawings

Neville Eyre, for all his help with the cowls

Kevin Dilks for Woodcomp propellor

Mark Burton for propellor controller

Mike Rudd, LAA inspector who helped get the project going

Westgate composites, who created a set of cowls from my hybrid of classic and Eyre cowls

LAA, for allowing the project

Phil Hall, inspector and test pilot to be



Vince Goddard

G-BWUP

Europa UL260iS Swiss tailwheel

peterz(at)zutrasoft.com
Guest

Posted: Mon Sep 30, 2013 3:12 pm Post subject: ULPowered Europa cleared for flight

Congrats! Pictures please! 



Cheers,

Pete



 	  Quote: 	
		   On Sep 30, 2013, at 6:02 PM, Groups <groups(at)thegoddards.com> wrote:

 

 

 

 Today BWUP the first UL260iS powered Europa was cleared for flight testing by the LAA. Hopefully if the weather is favourable BWUP should take to the air on Sunday. Thanks goes to the following for all their help, support and guidance:

 Mark Jones, Galaxy UL engines for the UL260iS

 Ian Rickard, for all those cad drawings and his support getting the project going

 ULPower, for the engine mount using Ian's drawings

 Neville Eyre, for all his help with the cowls

 Kevin Dilks for Woodcomp propellor

 Mark Burton for propellor controller

 Mike Rudd, LAA inspector who helped get the project going

 Westgate composites, who created a set of cowls from my hybrid of classic and Eyre cowls

 LAA, for allowing the project

 Phil Hall, inspector and test pilot to be

 

 

 

 Vince Goddard

 G-BWUP

 Europa UL260iS Swiss tailwheel

Groups(at)thegoddards.com
Guest

Posted: Tue Oct 01, 2013 1:40 am Post subject: ULPowered Europa cleared for flight

Sent from my phone



 	  Quote: 	
		   On 1 Oct 2013, at 00:11, Pete <peterz(at)zutrasoft.com> wrote:

 

 

 

 Congrats! Pictures please! 

 

 Cheers,

 Pete

 

> On Sep 30, 2013, at 6:02 PM, Groups <groups(at)thegoddards.com> wrote:

> 

> 

> 

> Today BWUP the first UL260iS powered Europa was cleared for flight testing by the LAA. Hopefully if the weather is favourable BWUP should take to the air on Sunday. Thanks goes to the following for all their help, support and guidance:

> Mark Jones, Galaxy UL engines for the UL260iS

> Ian Rickard, for all those cad drawings and his support getting the project going

> ULPower, for the engine mount using Ian's drawings

> Neville Eyre, for all his help with the cowls

> Kevin Dilks for Woodcomp propellor

> Mark Burton for propellor controller

> Mike Rudd, LAA inspector who helped get the project going

> Westgate composites, who created a set of cowls from my hybrid of classic and Eyre cowls

> LAA, for allowing the project

> Phil Hall, inspector and test pilot to be

> 

> 

> 

> Vince Goddard

> G-BWUP

> Europa UL260iS Swiss tailwheel

> 

> 

> 

> 

> 

> 

> 

 

 

====================================
	


====================================

====================================

====================================

 	  Quote: 	
		   

 

 


	




<pre><b><font size=2 color="#000000" face="courier new,courier">

image.jpeg

Description:

Filesize:

125.09 KB

Viewed:

6798 Time(s)

image.jpeg

Description:

Filesize:

117.01 KB

Viewed:

6798 Time(s)

Fred Klein

Joined: 26 Mar 2012
Posts: 503

Posted: Tue Oct 01, 2013 7:16 am Post subject: ULPowered Europa cleared for flight

On Oct 1, 2013, at 2:39 AM, Groups wrote:



 	  Quote: 	
		   <image.jpeg>

 

 <image.jpeg>

 Sent from my phone

 

> On 1 Oct 2013, at 00:11, Pete <peterz(at)zutrasoft.com> wrote:

> 

> 

> 

> Congrats! Pictures please! 


	


Wow...what a sweet, straightforward, and seemingly SIMPLE engine installation...Fred

frans(at)privatepilots.nl
Guest

Posted: Tue Oct 01, 2013 8:15 am Post subject: ULPowered Europa cleared for flight

On 10/01/2013 05:15 PM, Fred Klein wrote:



 	  Quote: 	
		   Wow...what a sweet, straightforward, and seemingly SIMPLE engine installation...Fred


	


Except that it is upside down. Luckily I have a laptop and I can easily

turn the laptop upside down. With my iPad or cell phone I tried it too,

but it doesn't help as it turns the picture upside down again by itself.

The only solution then is to stand on my head to look at the picture but

I guess I'm becoming too old for this.



Frans

groups(at)thegoddards.com
Guest

Posted: Tue Oct 01, 2013 10:06 am Post subject: ULPowered Europa cleared for flight

Try this one





Vince

G-BWUP



Sent from my iPad



 	  Quote: 	
		   On 1 Oct 2013, at 17:15, Frans Veldman <frans(at)privatepilots.nl> wrote:

 

 

 

> On 10/01/2013 05:15 PM, Fred Klein wrote:

> 

> Wow...what a sweet, straightforward, and seemingly SIMPLE engine installation...Fred

 

 Except that it is upside down. Luckily I have a laptop and I can easily

 turn the laptop upside down. With my iPad or cell phone I tried it too,

 but it doesn't help as it turns the picture upside down again by itself.

 The only solution then is to stand on my head to look at the picture but

 I guess I'm becoming too old for this.

 

 Frans

 

 

====================================
	


====================================

====================================

====================================

 	  Quote: 	
		   

 

 


	




<pre><b><font size=2 color="#000000" face="courier new,courier">

image.jpeg

Description:

Filesize:

556 KB

Viewed:

6781 Time(s)

europajimkelly(at)gmail.c
Guest

Posted: Tue Oct 01, 2013 11:29 am Post subject: ULPowered Europa cleared for flight

Hi Vince,                 I've just bought G-BWEG she's a taildragger the same as your's.  I haven't flown her yet although I've flown in her do you have any tips on ground handling ?

 



Keep in touch Vince.

Best wishes

Jim



On Tue, Oct 1, 2013 at 7:03 PM, Groups <groups(at)thegoddards.com (groups(at)thegoddards.com)> wrote:

 [quote]Try this one

 

 



 

 Vince

 G-BWUP

 

 Sent from my iPad

 

 > On 1 Oct 2013, at 17:15, Frans Veldman <frans(at)privatepilots.nl (frans(at)privatepilots.nl)> wrote:

 >

 > --> Europa-List message posted by: Frans Veldman <frans(at)privatepilots.nl (frans(at)privatepilots.nl)>

 >

 >> On 10/01/2013 05:15 PM, Fred Klein wrote:

 >>

 >> Wow...what a sweet, straightforward, and seemingly SIMPLE engine installation...Fred

 >

 > Except that it is upside down. Luckily I have a laptop and I can easily

 > turn the laptop upside down. With my iPad or cell phone I tried it too,

 > but it doesn't help as it turns the picture upside down again by itself.

 > The only solution then is to stand on my head to look at the picture but

 > I guess I'm becoming too old for this.

 >

 > Frans

 >

 >

 ===========

 ===========

 ===========

 ===========

 >

 >

 >

 

 

 <pre><b><font size=2 color"#000000" face="courier new,courier">

 

 ===========

 igator?Europa-List" target="_blank">http://www.matronics.com/Navigator?Europa-List">http://www.matronics.com/Navigator?Europa-List</a>

  ===========

  target="_blank">http://forums.matronics.com">http://forums.matronics.com</a>

  ===========

 le, List Admin.

 tribution" target="_blank">http://www.matronics.com/contribution">http://www.matronics.com/contribution</a>

  ===========

 

 </b></font></pre></body></html>

[b]

groups(at)thegoddards.com
Guest

Posted: Tue Oct 01, 2013 12:19 pm Post subject: ULPowered Europa cleared for flight

Hello Jim,



I have not flown an Europa yet so can not give you any tips. I do have over a hundred hours on Auster, Cub and Thruster tailwheel and the ground handling does not seem too difficult. The test pilot Phil Hall did comment that BWUP handled very nicely on the ground and the proof will be now on Saturday when she flies for the first time in over 5 years.



Weight wise BWUP has also gone on a huge diet losing nearly 70 pounds and not comes in at 870 pounds 59.77 inches. Not sure how this compares to other europa's?



Vince



Sent from my iPad



 	  Quote: 	
		   On 1 Oct 2013, at 20:29, James Kelly <europajimkelly(at)gmail.com> wrote:

 

 Hi Vince,

                  I've just bought G-BWEG she's a taildragger the same as your's.  I haven't flown her yet although I've flown in her do you have any tips on ground handling ?

 

 Keep in touch Vince.

 Best wishes

 Jim

rlborger(at)mac.com
Guest

Posted: Tue Oct 01, 2013 12:37 pm Post subject: ULPowered Europa cleared for flight

Vince,



Very good looking aircraft.  The engine installation looks quite simple and professional.



Can't wait to hear how she flies!



Blue skies & tailwinds,

Bob Borger

Europa XS Tri, Rotax 914, Airmaster C/S Prop.

Little Toot Sport Biplane, Lycoming Thunderbolt AEIO-320 EXP

3705 Lynchburg Dr.

Corinth, TX  76208-5331

Cel: 817-992-1117

rlborger(at)mac.com



On Oct 1, 2013, at 4:39 AM, Groups <groups(at)thegoddards.com> wrote:



<image.jpeg>



<image.jpeg>

Sent from my phone

groups(at)thegoddards.com
Guest

Posted: Tue Oct 01, 2013 12:46 pm Post subject: ULPowered Europa cleared for flight

Hello Fred,



Yes a simple air cooled fuel injected 107 bhp engine which takes an hour or so to remove and about the same to refit. Originally I had the engine mounted on the Europa using a 912 compatible mount, this was a little clunky so ULPower produced a dedicated mount which took only half a day to swap over.



Ta



Vince



Sent from my iPad



 	  Quote: 	
		   On 1 Oct 2013, at 16:15, Fred Klein <fklein(at)orcasonline.com> wrote:

 

 Wow...what a sweet, straightforward, and seemingly SIMPLE engine installation...Fred

Fred Klein

Joined: 26 Mar 2012
Posts: 503

Posted: Tue Oct 01, 2013 1:20 pm Post subject: ULPowered Europa cleared for flight

Vince...what information can you share regarding your engine's installed weight?...Fred



On Oct 1, 2013, at 1:44 PM, Groups wrote:



 	  Quote: 	
		   Yes a simple air cooled fuel injected 107 bhp engine which takes an hour or so to remove and about the same to refit. Originally I had the engine mounted on the Europa using a 912 compatible mount, this was a little clunky so ULPower produced a dedicated mount which took only half a day to swap over.

 

 Ta

 

 Vince

 

 Sent from my iPad

 

> On 1 Oct 2013, at 16:15, Fred Klein <fklein(at)orcasonline.com> wrote:

> 

> Wow...what a sweet, straightforward, and seemingly SIMPLE engine installation...Fred

groups(at)thegoddards.com
Guest

Posted: Wed Oct 02, 2013 7:01 am Post subject: ULPowered Europa cleared for flight

ï»¿Fred,

  	The UL260iS comes in at an installed weight of approx 73kg (including  all accessories, oil and exhaust). I have the 2x pumps, 2x course  filters and 2x fine filters plus the ECU mounted in the mono wheel tunnel,  the 2 x ignition, regulator and Oil/Air Separator mounted on the  fire wall so leaves about 65kg of engine and 12kg of Woodcomp SR  3000/3J hung on the engine mount. Not sure how this compares with  a rotax but looking at the rotax specs and adding the liquids etc I believe  the ULPower is lighter.

  	I did have to hang the Odyssey 680 battery of the pax footwell to get the  best CofG.

  	ta

  	Vince

 [quote] 	--

JonathanMilbank

Joined: 14 Apr 2012
Posts: 388
Location: Aberdeen area

Posted: Wed Oct 02, 2013 12:03 pm Post subject: Re: ULPowered Europa cleared for flight

Vince, please PM me at jdmilbank(at)hotmail.com. You might recall that I 'phoned you many moons ago on the advice of Ian Rickard, but I've lost your 'phone number.



At the time I told you that I spent many hours and days working on and inside the fuselage of your aircraft, on behalf of the previous owner. He in his turn wasn't aware of several matters which he inherited from someone else; now deceased I believe.



I built my own Europa between 1994 and 1997 and it's still going strong. Luckily I'm not so large that I can't crawl inside the rear fuselage, so I'm intimately acquainted with your machine.



It looks marvellous now and I'm very pleased that I never reached the stage of doing it's permit renewal test flight while the Subaru engine was still installed. I even drove from Aberdeenshire to Doncaster to fetch a donor Subaru on behalf of the owner, before he decided to sell it. You've got a bargain, with that undercarriage which can only be an improvement on my old monowheel. Differential brakes are the answer!

groups(at)thegoddards.com
Guest

Posted: Mon Oct 07, 2013 1:48 pm Post subject: ULPowered Europa cleared for flight

After some environmental issues on Saturday, BWUP was moved today to Lydeway field (thanks goes to Nigel Charles & LAA for giving permission) and took to the air for the first time in 7 years.  Reborn with a ULPower UL260iS engine and Woodcomp variable pitch propellor BWUP had 2 flights totalling 45 minutes. Both flights saw temperatures and pressures within normal limits with no undue vibrations or problems arising. Phil the test pilot commented on how smooth the engine was and removal of the cowls after each flight revealed no issues either. More flights hopefully this week if weather and work commitments allow.

Vince Goddard

G-BWUP

Europa UL260iS Swiss tailwheel



 	  Quote: 	
		  > Today BWUP the first UL260iS powered Europa was cleared for flight testing by the LAA. Hopefully if the weather is favourable BWUP should take to the air on Sunday. Thanks goes to the following for all their help, support and guidance:

> Mark Jones, Galaxy UL engines for the UL260iS

> Ian Rickard, for all those cad drawings and his support getting the project going

> ULPower, for the engine mount using Ian's drawings

> Neville Eyre, for all his help with the cowls

> Kevin Dilks for Woodcomp propellor

> Mark Burton for propellor controller

> Mike Rudd, LAA inspector who helped get the project going

> Westgate composites, who created a set of cowls from my hybrid of classic and Eyre cowls

> LAA, for allowing the project

> Phil Hall, inspector and test pilot to be

> 

> 

> 

> Vince Goddard

> G-BWUP

> Europa UL260iS Swiss tailwheel

 


	




<pre><b><font size=2 color="#000000" face="courier new,courier">

image.jpeg

Description:

Filesize:

568 KB

Viewed:

6673 Time(s)

rlborger(at)mac.com
Guest

Posted: Mon Oct 07, 2013 2:29 pm Post subject: ULPowered Europa cleared for flight

Vince,



Congratulations to all the good folks involved in the effort.  Looks like you have a winner there.



Please keep us posted on the continued testing.  We'd like to hear about t/o distance, rate of climb, cruise speeds and fuel flow.  



I'd also like to hear how the Swiss tail wheel configuration works out for ground/takeoff/landing handling.



Blue skies & tailwinds,

Bob Borger

Europa XS Tri, Rotax 914, Airmaster C/S Prop.

Little Toot Sport Biplane, Lycoming Thunderbolt AEIO-320 EXP

3705 Lynchburg Dr.

Corinth, TX  76208-5331

Cel: 817-992-1117

rlborger(at)mac.com



On Oct 7, 2013, at 4:46 PM, Groups <groups(at)thegoddards.com> wrote:



After some environmental issues on Saturday, BWUP was moved today to Lydeway field (thanks goes to Nigel Charles & LAA for giving permission) and took to the air for the first time in 7 years.  Reborn with a ULPower UL260iS engine and Woodcomp variable pitch propellor BWUP had 2 flights totalling 45 minutes. Both flights saw temperatures and pressures within normal limits with no undue vibrations or problems arising. Phil the test pilot commented on how smooth the engine was and removal of the cowls after each flight revealed no issues either. More flights hopefully this week if weather and work commitments allow.

<image.jpeg>

Vince Goddard

G-BWUP

Europa UL260iS Swiss tailwheel

ptag.dev(at)tiscali.co.uk
Guest

Posted: Mon Oct 07, 2013 2:36 pm Post subject: ULPowered Europa cleared for flight

Well done ...now the fun ...! Regards Bob Harrison G-PTAG Kit 337  914 .



--

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum