 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Craymondw(at)aol.com
Guest
|
 Posted: Sat May 19, 2007 5:04 am Post subject: Service Bulletin 160 |
 |
|
Replacing the AN364-428A nose wheel fork axle nut with a A365-428A doesn't give enough bolt threads and a longer bolt may be required. Note: When over torque, the wheel bearings start to bind up.
See what's free at AOL.com.
[quote][b]
| | - The Matronics Glasair-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Glasair-List |
|
|
|
| Back to top |
|
 |
s_korney(at)hotmail.com
Guest
|
| Posted: Sun May 20, 2007 4:00 pm Post subject: Service Bulletin 160 |
|
|
You can put shim washers inside and between the axle and the two aluminum
spacers and then the axle bolt and nut can be torqued to the proper spec
without binding the bearings......(note) I had to put about a .040 shim in
place...Now I tighten up the axle nut and the wheel bearings have the right
pre-load and the nut has the proper torque...
Best... Steve
----Original Message Follows----
From: Craymondw(at)aol.com
Reply-To: glasair-list(at)matronics.com
To: glasair-list(at)matronics.com
Subject: Re: Service Bulletin 160
Date: Sat, 19 May 2007 09:03:15 EDT
Replacing the AN364-428A nose wheel fork axle nut with a A365-428A doesn't
give enough bolt threads and a longer bolt may be required. Note: When over
torque, the wheel bearings start to bind up.
************************************** See what's free at
http://www.aol.com.
_________________________________________________________________
More photos, more messages, more storage�get 2GB with Windows Live Hotmail.
| | - The Matronics Glasair-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Glasair-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
