Matronics Email Lists :: View topic - Beech-List Digest: 2 Msgs

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Beech-List Digest: 2 Msgs - 05/03/08

Matronics Email Lists Forum Index -> Beech-List

View previous topic :: View next topic

Author Message

citabriapilot(at)comcast.
Guest

Posted: Sun May 04, 2008 6:17 am Post subject: Beech-List Digest: 2 Msgs - 05/03/08

Unless ABS has changed their thinking they are more interested in  

renting me a set then providing plans. With an available set of plans  

they would cost nearly nothing to make.  More owners and shops would  

have the right tools and better rigged aircraft.

I may just try them again.

Bob

On May 4, 2008, at 2:55 AM, Beech-List Digest Server wrote:



 	  Quote: 	
		   *



  ==================================================

    Online Versions of Today's List Digest Archive

  ==================================================



 Today's complete Beech-List Digest can also be found in either of the

 two Web Links listed below.  The .html file includes the Digest  

 formatted

 in HTML for viewing with a web browser and features Hyperlinked  

 Indexes

 and Message Navigation.  The .txt file includes the plain ASCII  

 version

 of the Beech-List Digest and can be viewed with a generic text editor

 such as Notepad or with a web browser.



 HTML Version:



     http://www.matronics.com/digest/digestview.php? 

 Style=82701&View=html&Chapter 08-05-03&Archive=Beech



 Text Version:



     http://www.matronics.com/digest/digestview.php? 

 Style=82701&View=txt&Chapter 08-05-03&Archive=Beech

  ================================================

    EMail Version of Today's List Digest Archive

  ================================================

            ----------------------------------------------------------

                            Beech-List Digest Archive

                                       ---

                      Total Messages Posted Sat 05/03/08: 2

            ----------------------------------------------------------

 Today's Message Index:

 ----------------------



      1. 08:01 PM - Ruddervator Travel Boards  (Bob Vandegrift)

      2. 08:08 PM - Re: Ruddervator Travel Boards  (BobsV35B(at)aol.com)



 ________________________________  Message 1   

 _____________________________________

 Time: 08:01:05 PM PST US

 From: Bob Vandegrift <citabriapilot(at)comcast.net>

 Subject: Ruddervator Travel Boards

 Any one have a drawing to make travel boards??

 thanks Bob

 ________________________________  Message 2   

 _____________________________________

 Time: 08:08:17 PM PST US

 From: BobsV35B(at)aol.com

 Subject: Re: Ruddervator Travel Boards



 Good Evening Bob,



 Have you checked with Tom Turner at the American Bonanza Society?



 Happy  Skies,



 Old Bob

 AKA

 Bob Siegfried

 Ancient Aviator

 628 West  86th Street

 Downers Grove, IL 60516

 630 985-8502

 Stearman  N3977A

 Brookeridge Air Park LL22

 In a message dated 5/3/2008 10:01:40 P.M. Central Daylight Time,

 citabriapilot(at)comcast.net writes:



 

 <citabriapilot(at)comcast.net>



 Any one have a drawing to make travel  boards??

 thanks  Bob

 **************Wondering what's for Dinner Tonight? Get new twists  

 on family

 favorites at AOL Food.

 (http://food.aol.com/dinner-tonight?NCID=aolfod00030000000001)

- The Matronics Beech-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Beech-List

n4546v(at)mindspring.com
Guest

Posted: Sun May 04, 2008 7:25 am Post subject: Beech-List Digest: 2 Msgs - 05/03/08

I would like a set too.  Am going to reinstall ruddervators soon and will 

have to rig.  I haven't studied the manuals yet to see if a drawing could be 

generated from the book.  I have basic CAD skills and if the specs were 

available, I would generate a CAD drawing that could then be glued to 

plywood or something and cut out.  And would be happy to share.



Randy, Las Vegas Straight 35

---

- The Matronics Beech-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Beech-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Beech-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum