|
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
Dana
Joined: 13 Dec 2007 Posts: 1047 Location: Connecticut, USA
|
Posted: Sun Oct 12, 2008 5:01 pm Post subject: CT MKIII crash |
|
|
Looks like the MKIII crash last month in CT (prelimnary report at
http://tinyurl.com/4cv3pq ) may have been caused by water in the fuel, at
least the investigator said there was water in the fuel line. AFAIK the
plane had no gascolator, no means to inspect or drain out water.
Pilot is home, leg healing nicely but still needing major reconstruction of
the shattered ankle. Passenger should be home soon, but with a long period
of taking it easy as the cracked (3 places) pelvis heals. Both are looking
forward to flying again though the passenger says he'll stick to his
gyrocopter!
-Dana
--
Lottery: a tax on the mathematically challenged.
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
Back to top |
|
|
capedavis(at)yahoo.com Guest
|
Posted: Mon Oct 13, 2008 1:46 pm Post subject: CT MKIII crash |
|
|
Dana, Looks like we should all have some sort of a gascolator built into our aircraft especially now that most of us are not counting micro-ounces to make 254lbs . Although I will admit I never had that problem till Norm and I did ,but I was a nut about the fuel quality ,but that is not a luxury we always have so a possibly wet can of fuel sent through a gascolater then a fresh fuel line filter which you carry onboard would be far supior to no fuel in the morn. It was after all Water and Bugs that killed Norm and left me disabled Firefly pilot to be! Chris
---
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
Back to top |
|
|
JetPilot
Joined: 10 Jan 2006 Posts: 1246
|
Posted: Mon Oct 13, 2008 3:45 pm Post subject: Re: CT MKIII crash |
|
|
A gascolator is a VERY good idea in any airplane, even an ultralight. In almost all water contamination cases, the gascolator will hold any water that may have gotten into your fuel until you land, and you will be able to catch it before it causes an engine failure. It would take a huge amount of water in the fuel to fill up a standard gascolator, and be sent on to the carbs. When I drain the gascolator, I can easily detect even the smallest amount of water, which would make me investigate where the water came from before I flew anymore... With a gascolator, water is just never going to make it into your carbs unless you are pouring large amounts of water into your tanks, in which case nothing will save you....
I have been been advising people to put in aircraft quality fuel components and fuel systems of accepted aircraft design in their Kolbs for a while now on this list. The weight gain is negligible for the extra safety and reliability it provides. There are always a few people here that are just to good to take advice from someone that is not popular here on this list, and that kind of grade school mentality is what gets people hurt. Aviation does not care who you or who your fiends are, if you make mistakes, you will likely get hurt or die.
Mike
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________ "NO FEAR" - If you have no fear you did not go as fast as you could have !!!
Kolb MK-III Xtra, 912-S |
|
Back to top |
|
|
lcottrell
Joined: 29 May 2006 Posts: 1494 Location: Jordan Valley, Or
|
Posted: Mon Oct 13, 2008 4:09 pm Post subject: CT MKIII crash |
|
|
Hi Chris D:
I have encountered the same problem with my Kolbs over the years. If I make a concerted effort to check the float bowls at least once a month, I have no problem. All it takes is a small drop of water to get the corrosion started in the "pot metal" float bowls. Then a little speck of trash gets over the main jet well fence, lodges in the main jet, and its forced landing time.
I have a home made gascolator that works well. If I drain fuel each day I fly, I do not have a water problem.
The two engine failures I experienced in the past 2,500+ 912 hours was caused by fuel contamination. Both times getting fuel from a reliable source, I thought.
Take care,
john h
mkIII
[quote] It was after all Water and Bugs that killed Norm and left me disabled Firefly pilot to be! Chris
[b]
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________ do not archive |
|
Back to top |
|
|
lcottrell
Joined: 29 May 2006 Posts: 1494 Location: Jordan Valley, Or
|
Posted: Mon Oct 13, 2008 4:15 pm Post subject: CT MKIII crash |
|
|
Mike B:
Haven't found it necessary to use aircraft quality fuel components and fuel systems designed for aircraft. What I do use is cheap, reliable, and has been proven over many thousands of hours.
The two engine failures I experienced be cause of fuel contamination could have been prevented very easily. However, due to pilot error, I did not check the fuel prior to takeoff in both cases. These forced landings were my fault.
john h
mkIII
[quote] I have been been advising people to put in aircraft quality fuel components and fuel systems of accepted aircraft design in their Kolbs for a while now on this list. The weight gain is negligible for the extra safety and reliability it provides. There are always a few people here that are just to good to take advice from someone that is not popular here on this list, and that kind of grade school mentality is what gets people hurt. Aviation does not care who you or who your fiends are, if you make mistakes, you will likely get hurt or die.
Mike
[b]
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________ do not archive |
|
Back to top |
|
|
Dana
Joined: 13 Dec 2007 Posts: 1047 Location: Connecticut, USA
|
Posted: Mon Oct 13, 2008 4:37 pm Post subject: CT MKIII crash |
|
|
At 05:45 PM 10/13/2008, chris davis wrote:
Quote: | Dana, Looks like we should all have some sort of a gascolator built into
our aircraft especially now that most of us are not counting micro-ounces
to make 254lbs...
|
Some may recall that I started a thread a year or so ago about trying to
find a suitable gascolator. Modern aircraft units are too heavy (I'm one
of the ounce counters) and expensive and the cheap tractor ones are too,
well, cheap, and have no drain provision without removing the bowl. What I
really want is the clear glass tube type with drain like I had on my
T-Craft, but nobody seems to make such a thing any more.
I settled for a loop of clear fuel line (sorry John) at the lowest point in
combination with the clear glass inline filter. No drain provision, but I
can see if there's anything there... so far nothing. I also always do a
full power runup and wait 'til the EGT stabilizes before the first flight
of every day and after each refueling.
But I'm still looking for that perfect gascolator.
-Dana
--
Help Wanted: Telepath. You know where to apply.
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
Back to top |
|
|
jbhart(at)onlyinternet.ne Guest
|
Posted: Mon Oct 13, 2008 4:55 pm Post subject: CT MKIII crash |
|
|
At 04:45 PM 10/13/08 -0700, you wrote:
Quote: |
A gascolator is a VERY good idea in any airplane, even an ultralight.
.......................
|
Quote: |
The weight gain is negligible for the extra safety and reliability it
|
provides. There are always a few people here that are just to good to take
advice from someone that is not popular here on this list, and that kind of
grade school mentality is what gets people hurt. Aviation does not care who
you or who your fiends are, if you make mistakes, you will likely get hurt
or die.
Mike,
If one does not draw fuel from the bottom of the tank and follows good
refueling practices, there is no need for a gascolator on a FireFly. Weight
is always a problem with an ultralight.
Why not just state your point and leave off the flogging of individuals who
you know are not going to follow your advice. Your information is not
unpopular but delivery is some what rough. I am sure grade school people
appreciate your humor and will accept all blame for ill advice. All of us
make mistakes all the time. For many of us that is how we learn.
Fortunately I am still around and continue to make mistakes. The last one
is probably in the responding to this email.
Please lighten up be kind to yourself.
Jack B. Hart FF004
Winchester, IN
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
Back to top |
|
|
lcottrell
Joined: 29 May 2006 Posts: 1494 Location: Jordan Valley, Or
|
Posted: Mon Oct 13, 2008 5:23 pm Post subject: CT MKIII crash |
|
|
Dana:
I put a "T" in the bottom of my fuel line loop. Dropped another line off the bottom. Then installed a $3.00 Briggs and Stratton plastic fuel shut off valve. Works great.
john h
mkIII
[quote] I settled for a loop of clear fuel line (sorry John) at the lowest point in
combination with the clear glass inline filter. No drain provision, but I
can see if there's anything there... so far nothing.
-Dana
[b]
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________ do not archive |
|
Back to top |
|
|
lcottrell
Joined: 29 May 2006 Posts: 1494 Location: Jordan Valley, Or
|
Posted: Mon Oct 13, 2008 5:28 pm Post subject: CT MKIII crash |
|
|
Jack H:
I agree with you 100%, as far as your Fire Fly is concerned.
For all other aircraft, especially the ones I fly, I want a gascolator.
I draw fuel from the lowest point of my fuel tank. The reason, so I can get every drop out of there if necessary.
I also use clean fuel, and the homemade gascolator and filter should take care of what I miss, unless I duplicate my two serious fueling mistakes I mentioned in an earlier message. As long as I take a fuel sample after fueling, I will know if it is good to go or not.
A fuel sample should be taken in a clear glass jar. That is the way I was taught in Army Rotary Wing Flight Training 40 years ago. It still works well today.
Take care,
john h
mklIII
[quote] If one does not draw fuel from the bottom of the tank and follows good
refueling practices, there is no need for a gascolator on a FireFly. Weight
is always a problem with an ultralight.
Jack B. Hart FF004
[b]
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________ do not archive |
|
Back to top |
|
|
NeilsenRM(at)comcast.net Guest
|
Posted: Mon Oct 13, 2008 8:03 pm Post subject: CT MKIII crash |
|
|
Dana/All
Great Plains Aircraft sells a gascolator that is light has a drain port and
is $29.95 or was a few years ago. I purchased a Curtis fuel quick drain
valve for mine. The gascolator is located at the low point of the fuel
system with the drain valve sticking out the side of the fuselage cage. I
sump my fuel system before each flight of the day and after each fueling.
There are a number of things like this that are normal for GA aircraft. They
have learned the value of gascolators, boost pumps, etc that greatly
increase safety. Nothing smart on my part just things that I got used to
having in a aircraft I fly.
Rick Neilsen
Redrive VW powered MKIIIC
---
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
Back to top |
|
|
grantr
Joined: 12 Sep 2007 Posts: 217
|
Posted: Tue Oct 14, 2008 4:42 am Post subject: Re: CT MKIII crash |
|
|
http://www.greatplainsas.com/pg28f.html
Great Plains Gascolator
This Gascolator is a high quality, low cost fuel filter and water strainer. It should be installed at a low point in the fuel system, below the fuel tank to trap any water that may accumulate so it can be drained. The gascolator has a 10 micron fuel filterand an 1/8" pipe thread outlet for a quick fuel drain valve (not included). If you are using a fuel pump, the pump should be installed between the carb and the gascolator.
Price . . . $29.95.
Curtis Quick Drain Valve for use on Gascolator . . . $11.75.
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
Back to top |
|
|
olendorf
Joined: 06 Jul 2006 Posts: 140 Location: Schenectady, NY USA
|
Posted: Tue Oct 14, 2008 9:42 am Post subject: Re: CT MKIII crash |
|
|
I know I'm going to get beat up for this one.
Why do you have to put the gascolator at the lowest point in the system? I bought a gascolator with a plastic bowl designed for JetSkis and I was going to put it right behind my seat so I could actually see it and empty it from time to time. Putting it at the lowest point would probably mean that it would never get looked at regularly. Any water still has to pass through the gascolator no matter where it is.
OK, shoot. Tell me how I'm wrong.
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________ Scott Olendorf
Original Firestar, Rotax 447, Powerfin prop
Schenectady, NY
http://sites.google.com/site/kolbfirestar/ |
|
Back to top |
|
|
jbhart(at)onlyinternet.ne Guest
|
Posted: Tue Oct 14, 2008 10:21 am Post subject: CT MKIII crash |
|
|
At 10:42 AM 10/14/08 -0700, you wrote:
Quote: |
I know I'm going to get beat up for this one.
Why do you have to put the gascolator at the lowest point in the system? I
bought a gascolator with a plastic bowl designed for JetSkis and I was going
|
to put it right behind my seat so I could actually see it and empty it from
time to time. Putting it at the lowest point would probably mean that it
would never get looked at regularly. Any water still has to pass through
the gascolator no matter where it is.
Scott,
You may want to consider water freezing. It is best if it freezes in the
colator rather that some place in the fuel
line.
Jack B. Hart FF004
Winchester, IN
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
Back to top |
|
|
Dana
Joined: 13 Dec 2007 Posts: 1047 Location: Connecticut, USA
|
Posted: Tue Oct 14, 2008 10:25 am Post subject: CT MKIII crash |
|
|
At 01:42 PM 10/14/2008, olendorf wrote:
Quote: | Why do you have to put the gascolator at the lowest point in the
system? I bought a gascolator with a plastic bowl designed for JetSkis
and I was going to put it right behind my seat so I could actually see it
and empty it from time to time. Putting it at the lowest point would
probably mean that it would never get looked at regularly. Any water
still has to pass through the gascolator no matter where it is.
OK, shoot. Tell me how I'm wrong.
|
Because, since water is heavier, it will naturally drain to the lowest
point in the system, where it can be drained off via the gascolator.
-Dana
--
Gun control: The theory that 110lb. women should have to fistfight with
210lb. rapists.
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
Back to top |
|
|
NeilsenRM(at)comcast.net Guest
|
Posted: Tue Oct 14, 2008 10:45 am Post subject: CT MKIII crash |
|
|
Scott
Its aircraft standard practice to put it in the lowest point. I believe
water in a system will separate and settle to the lowest point in a fuel
system over time. When you sump the system with a quick drain you will get
any water out of the system. This is your first warning that water is in
your fuel and may need to be drained further. If you don't have your
gascolator/quick drain at the low point you will not get any water out till
after the water has been pumped to it. I also believe that some water might
get through a gascolator if the fuel flow is high or the gascolator over
fills with water. Don't worry so much about access to the gascolator but do
make the quick drain accessible.
Rick Neilsen
Redrive VW powered MKIIIC
---
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
Back to top |
|
|
grantr
Joined: 12 Sep 2007 Posts: 217
|
Posted: Tue Oct 14, 2008 11:27 am Post subject: Re: CT MKIII crash |
|
|
Now I am confused.
On my plane the fuel pickups are on the bottom of the tanks and the fuel is pulled to the top of the tanks.
There is no way to put the gascolator at the bottom of my fuel system unless I install fuel pickups in the bottom of my tanks.
With my current setup would my plane even benefit from having one?
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
Back to top |
|
|
JetPilot
Joined: 10 Jan 2006 Posts: 1246
|
Posted: Tue Oct 14, 2008 11:35 am Post subject: Re: CT MKIII crash |
|
|
Here is the Aircraft Spruce gascolator I use. It is cheap, 70 bucks, works very well, has a built in screen and weighs maybe 8 ounces. It is light enough to use even on a Firefly. At a weight of 254 pounds, 8 ounces just isn't going to hurt anything even on a firefly. Dont forget to buy the extra gasket if you plan tu use auto gas, the included gasket is not compatible....
http://www.aircraftspruce.com/catalog/appages/acsgascolator.php
Even stock Mark III fuel tanks do not drain from the bottom, they are a similar setup to the fireflys tank, but you should still have a gascolator. Just because you draw gas from the top of your take through a tube is does not mean you do not need a gascolator. Any fuel system on an airplane should have one. Its not just for water, but any larger garbage will be blocked by the screen so that you can drain it out and see it. My guess is that the MK III in the accident had tanks that drew from the top like all stock Kolb MK III's do.... And yes even though he was drawing from the top he still really needed a gascolator. Its myths like this that get spread around by people that don't know any better are things that can get people hurt...
John H.
I will explain my statement about aircraft quality fuel parts a bit more, I do not mean certified aviation fuel parts, or even fuel components that have been especially built for aircraft. Many marine and auto lines and filters are of equal or better quality than some aircraft components. I mean to use top quality components that would be equal to or better aircraft grade - which I am sure you have in your MK III.
What I would most definitely NOT USE is that cheap, easily cut, easily melted semi clear fuel line that goes bad quickly and that is found in so many ultralights. Just because this substandard fuel line has found its way into the ultralight culture does not mean that it is a good idea.
Mike
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________ "NO FEAR" - If you have no fear you did not go as fast as you could have !!!
Kolb MK-III Xtra, 912-S |
|
Back to top |
|
|
smlplanet(at)msn.com Guest
|
Posted: Tue Oct 14, 2008 11:47 am Post subject: CT MKIII crash |
|
|
YES.....cheap insurance.....as they say shit happens and it is a long way
down and time to think about what you could or should have done to prevent
it.
--------------------------------------------------
From: "grantr" <grant_richardson25(at)yahoo.com>
Sent: 2008-10-14 15:27
To: <kolb-list(at)matronics.com>
Subject: Re: CT MKIII crash
Quote: |
Now I am confused.
On my plane the fuel pickups are on the bottom of the tanks and the fuel
is pulled to the top of the tanks.
There is no way to put the gascolator at the bottom of my fuel system
unless I install fuel pickups in the bottom of my tanks.
With my current setup would my plane even benefit from having one?
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p 8777#208777
|
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
Back to top |
|
|
NeilsenRM(at)comcast.net Guest
|
Posted: Tue Oct 14, 2008 12:02 pm Post subject: CT MKIII crash |
|
|
Mike
You say stock tanks don't drain from the bottom. Are you sure? My stock Kolb
5 gallon tanks drain from the bottom. I added a finger strainer/shutoff
valve to the stock setup when I installed my stock bottom drains to my stock
tanks per Kolb instructions. Has this changed?
I don't know for sure that a gascolator will work as designed with the top
draw system but it seems it would help. I guess this is another argument for
the standard practice of bottom drain fuel tanks. Has anyone that has had a
bottom drain installed properly ever had a leak? I still don't fully
understand why one would use the top draw system.
Rick Neilsen
Redrive VW powered MKIIIC
---
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
Back to top |
|
|
Dana
Joined: 13 Dec 2007 Posts: 1047 Location: Connecticut, USA
|
Posted: Tue Oct 14, 2008 12:32 pm Post subject: CT MKIII crash |
|
|
At 04:00 PM 10/14/2008, Richard & Martha Neilsen wrote:
Quote: | You say stock tanks don't drain from the bottom. Are you sure? My stock
Kolb 5 gallon tanks drain from the bottom. I added a finger
strainer/shutoff valve to the stock setup when I installed my stock bottom
drains to my stock tanks per Kolb instructions. Has this changed?
I don't know for sure that a gascolator will work as designed with the top
draw system but it seems it would help. I guess this is another argument
for the standard practice of bottom drain fuel tanks. Has anyone that has
had a bottom drain installed properly ever had a leak? I still don't fully
understand why one would use the top draw system.
|
The accident aircraft drew fuel through the top of the tanks and had no
gascolator.
With top draw, the gascolator will catch water as it flows through the
gascolator (which is the most important thing) but it won't pick up water
that settles in the bottom of the tank(s) while the aircraft is sitting.
-Dana
--
I don't trust a government I can't shoot back at.
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|