Matronics Email Lists :: View topic - Baggage Door Seal Channel

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Baggage Door Seal Channel

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

Phil.Perry(at)netapp.com
Guest

Posted: Sun Feb 21, 2010 7:52 pm Post subject: Baggage Door Seal Channel

I’m riveting the nutplates to the F-1031 Baggage Door Seal Channel..  

   

The part is .025 and calls for countersinking for flush AN426-AD3 rivets.  This obviously blows out the hole and I have to think Vans is aware of that since it’s .025?  

   

I obviously enlarged those holes to get flush rivet heads.  Has anyone else who’s followed “the plans” experienced problems with the mfg heads working through the material?  

   

Also, any tricks to drive those rivets on the inside of the channel?  

   

Thanks,  

Phil  

   

   

      [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Strasnuts

Joined: 10 Feb 2009
Posts: 502
Location: Salt Lake City, UT

Posted: Sun Feb 21, 2010 8:02 pm Post subject: Baggage Door Seal Channel

I believe tim olsens site addressed this



Sent from my iPhone



On Feb 21, 2010, at 20:51, "Perry, Phil" <Phil.Perry(at)netapp.com (Phil.Perry(at)netapp.com)> wrote:



[quote]    

Iâ€™m riveting the nutplates to the F-1031 Baggage Door Seal Channel..  

   

The part is .025 and calls for countersinking for flush AN426-AD3 rivets.  This obviously blows out the hole and I have to think Vans is aware of that since itâ€™s .025?  

   

I obviously enlarged those holes to get flush rivet heads.  Has anyone else whoâ€™s followed â€œthe plansâ€ experienced problems with the mfg heads working through the material?  

   

Also, any tricks to drive those rivets on the inside of the channel?  

   

Thanks,  

Phil  

   

   

       	  Quote: 	
		  



 href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List

href="http://forums.matronics.com">http://forums.matronics.com

href="http://www.matronics.com/contribution">http://www.matronics.com/contribution



	


[b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
40936
RV-10 SB N801VR Flying
780 Hours
SuperSTOL 60 hours

Phil.Perry(at)netapp.com
Guest

Posted: Sun Feb 21, 2010 8:11 pm Post subject: Baggage Door Seal Channel

I checked over there but didn't see anything. I might have been looking in the wrong sections though. 



Phil

 

  From: Seano <sean(at)braunandco.com> 

To: rv10-list(at)matronics.com <rv10-list(at)matronics.com> 

Sent: Sun Feb 21 20:01:32 2010

Subject: Re: RV10-List: Baggage Door Seal Channel 

 I believe tim olsens site addressed this



Sent from my iPhone



On Feb 21, 2010, at 20:51, "Perry, Phil" <Phil.Perry(at)netapp.com (Phil.Perry(at)netapp.com)> wrote:



[quote]    

Iâ€™m riveting the nutplates to the F-1031 Baggage Door Seal Channel..  

   

The part is .025 and calls for countersinking for flush AN426-AD3 rivets.  This obviously blows out the hole and I have to think Vans is aware of that since itâ€™s .025?  

   

I obviously enlarged those holes to get flush rivet heads.  Has anyone else whoâ€™s followed â€œthe plansâ€ experienced problems with the mfg heads working through the material?  

   

Also, any tricks to drive those rivets on the inside of the channel?  

   

Thanks,  

Phil  

   

   

       	  Quote: 	
		  



 href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List

href="http://forums.matronics.com">http://forums.matronics.com

href="http://www.matronics.com/contribution">http://www.matronics.com/contribution



	


[b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Strasnuts

Joined: 10 Feb 2009
Posts: 502
Location: Salt Lake City, UT

Posted: Sun Feb 21, 2010 8:28 pm Post subject: Baggage Door Seal Channel

It's amazing how quick you forget these  steps.  I thought I just did this but can't remember how I did it.  I  ask friends of mine who built rv-10's and when they say,"I can't remember" makes  me think what the hell?  But know I realize how they feel.

  

 Here?  third of the way down on the right side  picture??

  

 http://www.myrv10.com/N104CD/fuselage/20050530/index.html

  

  

 [quote]   ---

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
40936
RV-10 SB N801VR Flying
780 Hours
SuperSTOL 60 hours

Kelly McMullen

Joined: 16 Apr 2008
Posts: 1188
Location: Sun Lakes AZ

Posted: Sun Feb 21, 2010 9:23 pm Post subject: Baggage Door Seal Channel

Could you point out where? I don't see it in the tips, nor where he

did the baggage door. It does seem strange to be countersinking skin

that thin.



On Sun, Feb 21, 2010 at 9:01 PM, Seano <sean(at)braunandco.com> wrote:

 	  Quote: 	
		   I believe tim olsens site addressed this



 Sent from my iPhone

 On Feb 21, 2010, at 20:51, "Perry, Phil" <Phil.Perry(at)netapp.com> wrote:



 I’m riveting the nutplates to the F-1031 Baggage Door Seal Channel..



 The part is .025 and calls for countersinking for flush AN426-AD3 rivets.

 This obviously blows out the hole and I have to think Vans is aware of that

 since it’s .025?



 I obviously enlarged those holes to get flush rivet heads.  Has anyone else

 who’s followed “the plans” experienced problems with the mfg heads working

 through the material?



 Also, any tricks to drive those rivets on the inside of the channel?



 Thanks,



 Phil

 href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List

 href="http://forums.matronics.com">http://forums.matronics.com

 href="http://www.matronics.com/contribution">http://www.matronics.com/contribution

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor
KCHD

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum