Matronics Email Lists :: View topic - Found the Cause of My Problems

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Found the Cause of My Problems

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

nuckolls.bob(at)aeroelect
Guest

Posted: Wed Jun 02, 2010 12:58 pm Post subject: Found the Cause of My Problems

 	  Quote: 	
		  

Lesson Learned: check each and every nut at Annual, especially under those

connector covers that sit in hard-to-reach locations.


	


    Your story is not uncommon. Loosening hardware is one

    of the higher-order risks. Nylon or fiber insert lock

    nuts are a fair bet. Also, consider a mild thread-locker

    designed for maintenance removal. This is especially

    useful on contactors with coarse threads more likely

    to loosen up under vibration of heavy lead wires

    attached.  This is another advantage of welding cable

    as a fat-wire material . . . the stuff is so flexible

    that its ability to transmit torsional vibration to

    the stud is far lower than for "aircraft wire".

   Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum