Matronics Email Lists :: View topic - Stall warning access hatch question

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Stall warning access hatch question

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

william(at)gbta.net
Guest

Posted: Fri Dec 10, 2010 3:51 pm Post subject: Stall warning access hatch question

Page 19-2.  Match drilling all the holes from the  access hatch doubler to the leading edge skin.  There's no callout for  drilling the screw holes (the plans have us match drill all the nutplate attach  holes but there is no mention of the screw holes).  A couple steps later we  are asked to dimple the screw holes for #6 screws.  I would assume we are  to go ahead and drill them and dimple for a #6 screw.  If so, what size do  we drill the holes?

  

 Am I missing something?

  

 Bill

  

   [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

carl.froehlich(at)verizon
Guest

Posted: Fri Dec 10, 2010 5:00 pm Post subject: Stall warning access hatch question

#6 screws are #28 drill bit.  #8 screws are #19 drill bit.

 

Carl

 

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Billy & Tami Britton

Sent: Friday, December 10, 2010 6:18 PM

To: rv10-list(at)matronics.com

Subject: Stall warning access hatch question

 

Page 19-2.  Match drilling all the holes from the access hatch doubler to the leading edge skin.  There's no callout for drilling the screw holes (the plans have us match drill all the nutplate attach holes but there is no mention of the screw holes).  A couple steps later we are asked to dimple the screw holes for #6 screws.  I would assume we are to go ahead and drill them and dimple for a #6 screw.  If so, what size do we drill the holes?



 



Am I missing something?



 



Bill



 

 	  Quote: 	
		   <www.buildersbooks.comwww.homebuilthelp.comhttp://www.matronic================= 	
http://forums.matronics.com[/url]=====[/b][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Andy Turner

Joined: 10 Jan 2006
Posts: 31
Location: Clarion, PA

Posted: Mon Dec 13, 2010 7:06 am Post subject: Re: Stall warning access hatch question

Bill, I think you will find that when you run a #27 or 28 drill through the doublers that they are already punched to final size. So you can just deburr and dimple.

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Andy Turner

william(at)gbta.net
Guest

Posted: Mon Dec 13, 2010 6:45 pm Post subject: Stall warning access hatch question

Thanks Andy.  I already figured that out.  Just had one of my "moments".



Bill



--------------------------------------------------

From: "Andy Turner" <aturner(at)clarion.edu>

Sent: Monday, December 13, 2010 9:06 AM

To: <rv10-list(at)matronics.com>

Subject: Re: Stall warning access hatch question



 	  Quote: 	
		   



 Bill, I think you will find that when you run a #27 or 28 drill through 

 the doublers that they are already punched to final size. So you can just 

 deburr and dimple.



 --------

 Andy Turner





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p=323169#323169

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum