 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
davidsoutpost(at)comcast.
Guest
|
 Posted: Tue May 15, 2012 9:55 am Post subject: Doors & gas struts |
 |
|
No experience with it here but some folks over at the canard sites use Spray Lat http://www.aircraftspruce.com/catalog/cspages/plexiglasProtector.php and have had problems removing it. I just taped the window edges with some high quality pvc painters tape, then cut a heavy piece of soft flexible heavy clear vinyl sheet to fit and taped it down on top of the edging tape with Gorilla duct tape. Ran an X of Gorilla tape over the vinyl . We also did this on the Cozy transparencies and it works great and is cheap.
David Clifford
RV-10 Builder
Howell, MI
From: "rleffler" <rv(at)thelefflers.com>
To: rv10-list(at)matronics.com
Sent: Tuesday, May 15, 2012 1:25:40 PM
Subject: Re: Doors & gas struts
--> RV10-List message posted by: "rleffler" <rv(at)thelefflers.com>
I found a product on ACS called DISCOAT that looks interesting in protecting the windows during construction and paint. (http://www.aircraftspruce.com/catalog/cspages/discoat4220plexiglass.php)
Does anyone have any experience using the product? If so, how much did you need to cover all five windows.
thanks,
bob
--------
Bob Leffler
N410BL - FWF
RV-10 #40684
http://mykitlog.com/rleffler
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=373111#373111
-Matt Dralle,============
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
mauledriver(at)nc.rr.com
Guest
|
| Posted: Wed May 16, 2012 7:03 pm Post subject: Doors & gas struts |
|
|
I used this stuff and it works as advertised. You'll probably end up applying it several times to each piece but, only because that's how the work goes. It goes along way and is easy to take off. Took awhile to trust it and you still tape edges. Paper and tape works as well but you can't see through it.
Bill
Sent from my iPad
On May 15, 2012, at 1:25 PM, "rleffler" <rv(at)thelefflers.com> wrote:
| Quote: |
I found a product on ACS called DISCOAT that looks interesting in protecting the windows during construction and paint. (http://www.aircraftspruce.com/catalog/cspages/discoat4220plexiglass.php)
Does anyone have any experience using the product? If so, how much did you need to cover all five windows.
thanks,
bob
--------
Bob Leffler
N410BL - FWF
RV-10 #40684
http://mykitlog.com/rleffler
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=373111#373111
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
rleffler
Joined: 05 Nov 2006
Posts: 680
|
| Posted: Thu May 17, 2012 1:41 am Post subject: Doors & gas struts |
|
|
Bill,
How much did you use to cover all the windows?
Thanks,
Bob
Sent from my iPad
On May 16, 2012, at 11:02 PM, Bill Watson <mauledriver(at)nc.rr.com> wrote:
| Quote: |
I used this stuff and it works as advertised. You'll probably end up applying it several times to each piece but, only because that's how the work goes. It goes along way and is easy to take off. Took awhile to trust it and you still tape edges. Paper and tape works as well but you can't see through it.
Bill
Sent from my iPad
On May 15, 2012, at 1:25 PM, "rleffler" <rv(at)thelefflers.com> wrote:
>
>
> I found a product on ACS called DISCOAT that looks interesting in protecting the windows during construction and paint. (http://www.aircraftspruce.com/catalog/cspages/discoat4220plexiglass.php)
>
> Does anyone have any experience using the product? If so, how much did you need to cover all five windows.
>
> thanks,
>
> bob
>
> --------
> Bob Leffler
> N410BL - FWF
> RV-10 #40684
> http://mykitlog.com/rleffler
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=373111#373111
>
>
>
>
>
>
>
>
>
>
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Bob Leffler
N410BL - Phase I
http://mykitlog.com/rleffler |
|
| Back to top |
|
|
John Ackerman
Joined: 19 Jun 2006
Posts: 130
Location: Prescott, AZ
|
| Posted: Thu May 17, 2012 5:11 am Post subject: Doors & gas struts |
|
|
I have a gallon of this stuff (or equivalent) . Let men know if you want it for shipping cost. I will be home by ttomorrow
John Ackerman
On May 16, 2012, at 9:02 PM, Bill Watson <mauledriver(at)nc.rr.com> wrote:
| Quote: |
I used this stuff and it works as advertised. You'll probably end up applying it several times to each piece but, only because that's how the work goes. It goes along way and is easy to take off. Took awhile to trust it and you still tape edges. Paper and tape works as well but you can't see through it.
Bill
Sent from my iPad
On May 15, 2012, at 1:25 PM, "rleffler" <rv(at)thelefflers.com> wrote:
>
>
> I found a product on ACS called DISCOAT that looks interesting in protecting the windows during construction and paint. (http://www.aircraftspruce.com/catalog/cspages/discoat4220plexiglass.php)
>
> Does anyone have any experience using the product? If so, how much did you need to cover all five windows.
>
> thanks,
>
> bob
>
> --------
> Bob Leffler
> N410BL - FWF
> RV-10 #40684
> http://mykitlog.com/rleffler
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=373111#373111
>
>
>
>
>
>
>
>
>
>
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
