sttwig
Joined: 26 Aug 2007 Posts: 31 Location: Yakima, WA
|
Posted: Tue Sep 16, 2014 12:09 pm Post subject: alternator knocked off line when strobes turned on |
|
|
Good day,
When my strobes are turned on, after two or three seconds the alternator
goes off line. I can turn the strobe switch off, recycle the master
switch and the alternator comes back on line. With the strobes off, I
can load the electrical system clear up to fifty amps with the landing
light, nav. lights, pitot heat, etc. and the alternator won't go off
line. When the alternator goes off line with the strobes on, the
strobes continue to operate off the battery. This behavior just started.
The aircraft is an older Super Cub. The only instrumentation in the
electrical system is an ammeter on the alternator output. I cannot find
a breaker in the field circuit. The alternator is an InterAv (Motorola)
and the voltage regulator appears to be a Motorola. The strobes are
Whelan.
Any thoughts are appreciated. Thank you,
Steve S.
---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|