Matronics Email Lists :: View topic - Trim Tab Cable Anchor Bracket

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Trim Tab Cable Anchor Bracket

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

zackrv8(at)verizon.net
Guest

Posted: Fri Jan 13, 2006 7:59 am Post subject: Trim Tab Cable Anchor Bracket

Guys,

 �

 �� Dave made up some anchor brackets out of 6061 aluminum  billet.� He copied the exact angle of Vans W-415 weldment (you know the  part with the "tack welded" nut).� Well, I installed the new aluminum  bracket onto the elevator yesterday and it wouldn't fit real nice.� Let me  explain....The new bracket was drilled exactly where Vans says to put his  w-415.� After installing the trim tab cable to the trim tab and routing the  cable thru the forward elevator spar, the trim tab access cover would not nest  in its recess in the elevator without undue force.� The angle of the  bracket (25 degrees) made the cable bind when going thru the forward spar of the  elevator.� 

 �

 �� I doubled checked this with Vans W-415 part.�  Same thing.� Did anyone else have this problem?� Anyway, Dave came  out, measured the proper nut�angle (15 degrees), and made a new  bracket.� After installing the new bracket I am happy to say there is no  more binding, thru the full range of motion of the cable, while it is attached  to the trim tab.� This thing fits perfect.

 �

 � Btw, I called Vans and talked to Gus about this.� Gus's  answer was to re-weld the nut at the proper angle.� I told him I would have  someone make up a aluminum bracket from billet.� He said that would be  best.

 �

 � Anyway, I caught this in time and Dave will send out all the  brackets to those who already ordered from Dave, �with this new 15 degree  nut angle.� He just has to make up new ones.

 �

 Zack

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Dick Sipp

Joined: 11 Jan 2006
Posts: 215
Location: Hope, MI

Posted: Sat Jan 14, 2006 5:58 pm Post subject: Trim Tab Cable Anchor Bracket

Zack:

 �

 Please re-post Dave's contact info for ordering.

 �

 Thanks

 �

 Dick Sipp

 40065

 do not achieve

 [quote]   ---

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

zackrv8

Joined: 14 Jan 2006
Posts: 133

Posted: Sat Jan 14, 2006 7:42 pm Post subject: Re: Trim Tab Cable Anchor Bracket

Contact Dave at 302-437-6087.  He made up a bunch of Trim Tab Cable Anchor Brackets with the new 15 degree angle.  Again, this bracket is CNC milled from 6061 billet.  Dave said it is 3 times stronger than Vans' part.



Zack





[quote="Dick Sipp"]Zack:

 ?

 Please re-post Dave's contact info for ordering.

 ?

 Thanks

 ?

 Dick Sipp

 40065

 do not achieve

  	  Quote: 	
		     ---

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
RV8 #80125
RV10 # 40512

rv10(at)tpg.com.au
Guest

Posted: Sat Jan 14, 2006 8:43 pm Post subject: Trim Tab Cable Anchor Bracket

G'day,



Any ordering options for those of us in other countries?



Thanks,

Scott Lewis

RV-10 40172

Adelaide, South Australia

zackrv8 wrote:

 	  Quote: 	
		   

 

 Contact Dave at 302-437-6087.  He made up a bunch of Trim Tab Cable Anchor Brackets with the new 15 degree angle.  Again, this bracket is CNC milled from 6061 billet.  Dave said it is 3 times stronger than Vans' part.

 

 Zack

 

 

 

 

 [quote="Dick Sipp"]Zack:

  ?

  Please re-post Dave's contact info for ordering.

  ?

  Thanks

  ?

  Dick Sipp

  40065

  do not achieve

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

zackrv8

Joined: 14 Jan 2006
Posts: 133

Posted: Sun Jan 15, 2006 5:11 pm Post subject: Re: Trim Tab Cable Anchor Bracket

Scott,



  G'Day mate!  Dave is working on PayPal.  Hopefully, he'll have it up on his web site soon.  www.rivethead-aero.com



  I enclosed a picture of the bracket riveted onto the trim tab cover plate.



Zack

[quote="rv10(at)tpg.com.au"]G'day,



Any ordering options for those of us in other countries?



Thanks,

Scott Lewis

RV-10 40172

Adelaide, South Australia

zackrv8 wrote:

 	  Quote: 	
		   

 

 Contact Dave at 302-437-6087.  He made up a bunch of Trim Tab Cable Anchor Brackets with the new 15 degree angle.  Again, this bracket is CNC milled from 6061 billet.  Dave said it is 3 times stronger than Vans' part.

 

 Zack

 

 

 

 

  	  Dick Sipp wrote: 	
		  Zack:

  ?

  Please re-post Dave's contact info for ordering.

  ?

  Thanks

  ?

  Dick Sipp

  40065

  do not achieve

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

DSC03924.JPG

Description:

Trim Tab Cable Anchor Bracket.

Filesize:

34.84 KB

Viewed:

911 Time(s)

_________________
RV8 #80125
RV10 # 40512

william(at)gbta.net
Guest

Posted: Sun Jan 15, 2006 7:28 pm Post subject: Trim Tab Cable Anchor Bracket

Zack, will we need to order new cover plates if we've already got holes 

drilled for the stock pieces???



Bill Britton



---

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

zackrv8

Joined: 14 Jan 2006
Posts: 133

Posted: Mon Jan 16, 2006 5:42 am Post subject: Re: Trim Tab Cable Anchor Bracket

 	  william(at)gbta.net wrote: 	
		  Zack, will we need to order new cover plates if we've already got holes 

drilled for the stock pieces???



Bill Britton



--- 	




Bill, Yes.  The new bracket is wider than Van's W-412 and the hole pattern is wider.

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
RV8 #80125
RV10 # 40512

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum