Matronics Email Lists :: View topic - Any user feed back of f.u.n.k.e avionics?

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Any user feed back of f.u.n.k.e avionics?

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

pete(at)lawless.info
Guest

Posted: Sat Aug 15, 2015 4:19 am Post subject: Any user feed back of f.u.n.k.e avionics?

Hi All



Just thinking of an upgrade to my Microair radio and old Mode C King.



Anyone using funke? They appear to be better value than the Trig or 

Becker but I do not know anyone who uses one.



Comments on user experience please.  In particular is the built in 

intercom any good.



Thanks



Pete



G-RMAC Classic #109

bryannortje

Joined: 16 Jul 2015
Posts: 11
Location: Northants - UK

Posted: Sat Aug 15, 2015 5:48 am Post subject: Any user feed back of f.u.n.k.e avionics?

Hi Pete



I have fitted both the OLED transceiver and the mode S units in my previous build G-TORO and now fitting them into my recently bought Europa G-CFKZ. IMHO they are fantastic units and if installed properly with good antennae will prove to be great additions to your plane. The built in intercom is brilliant and coupled with good headsets beats anything else hands down.



The frequency dual watch facility on the Radio is brilliant. The transponder is also ADS-B ready so supplying a GPS feed and you then visible to any aircraft with TCAS and a further help to ATC units whom don't have secondary radar.



If you are a dab hand at electrics i would suggest doing the connector yourself and avoid the pre-made Loom available. I say this purely due to the loom available, (well the one supplied by LX Avionics) is rather heavy and you can buy a plastic connector housing for the Radio from Maplins which is lighter than the one supplied with the radio.



Call Mike Pettican from LX Avionics and he will sort a good deal for you. Usually they have units in stock and if you local to the South Northants area you can collect.



If you need any further info, don't hesitate to ask.



Regards

Bryan



Sent from my iPad



 	  Quote: 	
		   On 15 Aug 2015, at 07:18, Pete Lawless <pete(at)lawless.info> wrote:

 

 

 

 Hi All

 

 Just thinking of an upgrade to my Microair radio and old Mode C King.

 

 Anyone using funke? They appear to be better value than the Trig or Becker but I do not know anyone who uses one.

 

 Comments on user experience please.  In particular is the built in intercom any good.

 

 Thanks

 

 Pete

 

 G-RMAC Classic #109

_________________
Aircraft Kit Builder and Passionate about Flying

Alfred Buess

Joined: 11 Jan 2006
Posts: 67

Posted: Sat Aug 15, 2015 6:12 am Post subject: Any user feed back of f.u.n.k.e avionics?

Pete, I have a funke TRT800H transponder in my Europa, so far few but good experiences. As for the COM I prefered the Dittel KRT2: excellent unit with a reasonable price, low power consumption, dual watch, there exists an adapter for the Microair COM for an easy upgrade. Very good experiences so far. Have a look at there website for more information.

Regards Alfred



Von meinem iPad gesendet



 	  Quote: 	
		   Am 15.08.2015 um 14:18 schrieb Pete Lawless <pete(at)lawless.info>:

 

 

 

 Hi All

 

 Just thinking of an upgrade to my Microair radio and old Mode C King.

 

 Anyone using funke? They appear to be better value than the Trig or Becker but I do not know anyone who uses one.

 

 Comments on user experience please.  In particular is the built in intercom any good.

 

 Thanks

 

 Pete

 

 G-RMAC Classic #109

peterz(at)zutrasoft.com
Guest

Posted: Sat Aug 15, 2015 6:36 am Post subject: Any user feed back of f.u.n.k.e avionics?

as I posted earlier fwiw, I find the Trig set performs terrifically - even in my *very* harsh vibration environment.\



Cheers,

Pete

A239 (still a pile of parts)

C-IPWZ

[img]cid:ii_14f31c9042e9ce9b[/img]



On Sat, Aug 15, 2015 at 10:11 AM, YKI <ykibuess(at)bluewin.ch (ykibuess(at)bluewin.ch)> wrote:

 	  Quote: 	
		  --> Europa-List message posted by: YKI <ykibuess(at)bluewin.ch (ykibuess(at)bluewin.ch)>

 

 Pete, I have a funke TRT800H transponder in my Europa, so far few but good experiences. As for the COM I prefered the Dittel KRT2: excellent unit with a reasonable price, low power consumption, dual watch, there exists an adapter for the Microair COM for an easy upgrade. Very good experiences so far. Have a look at there website for more information.

 Regards Alfred

 

 Von meinem iPad gesendet

 

 > Am 15.08.2015 um 14:18 schrieb Pete Lawless <pete(at)lawless.info (pete(at)lawless.info)>:

 >

 > --> Europa-List message posted by: Pete Lawless <pete(at)lawless.info (pete(at)lawless.info)>

 >

 > Hi All

 >

 > Just thinking of an upgrade to my Microair radio and old Mode C King.

 >

 > Anyone using funke? They appear to be better value than the Trig or Becker but I do not know anyone who uses one.

 >

 > Comments on user experience please.Â  In particular is the built in intercom any good.

 >

 > Thanks

 >

 > Pete

 >

 > G-RMAC Classic #109

 >

 >

 >

 >

 

 

 ===========

 pa-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?Europa-List

 ===========

  FORUMS -

 eferrer" target="_blank">http://forums.matronics.com

 ===========

 b Site -

 Â  Â  Â  Â  Â  -Matt Dralle, List Admin.

 rel="noreferrer" target="_blank">http://www.matronics.com/contribution

 ===========

location.jpg

Description:

Filesize:

377.87 KB

Viewed:

8645 Time(s)

pete(at)lawless.info
Guest

Posted: Sat Aug 15, 2015 11:40 pm Post subject: Any user feed back of f.u.n.k.e avionics?

Thanks for the feed back funke sounds interesting but so does the Dittel 

which I had not heard of before.  The Dittel is also a much more 

sensible price at sub £800 in the UK.  Trig was what I expected.

Regards

Pete

On 15/08/15 14:47, Bryan Nortje wrote:

 	  Quote: 	

 Hi Pete

 I have fitted both the OLED transceiver and the mode S units in my previous build G-TORO and now fitting them into my recently bought Europa G-CFKZ. IMHO they are fantastic units and if installed properly with good antennae will prove to be great additions to your plane. The built in intercom is brilliant and coupled with good headsets beats anything else hands down.

 The frequency dual watch facility on the Radio is brilliant. The transponder is also ADS-B ready so supplying a GPS feed and you then visible to any aircraft with TCAS and a further help to ATC units whom don't have secondary radar.

 If you are a dab hand at electrics i would suggest doing the connector yourself and avoid the pre-made Loom available. I say this purely due to the loom available, (well the one supplied by LX Avionics) is rather heavy and you can buy a plastic connector housing for the Radio from Maplins which is lighter than the one supplied with the radio.

 Call Mike Pettican from LX Avionics and he will sort a good deal for you. Usually they have units in stock and if you local to the South Northants area you can collect.

 If you need any further info, don't hesitate to ask.

 Regards

 Bryan

 Sent from my iPad

> On 15 Aug 2015, at 07:18, Pete Lawless <pete(at)lawless.info> wrote:

>

> 

>

> Hi All

>

> Just thinking of an upgrade to my Microair radio and old Mode C King.

>

> Anyone using funke? They appear to be better value than the Trig or Becker but I do not know anyone who uses one.

>

> Comments on user experience please.  In particular is the built in intercom any good.

>

> Thanks

>

> Pete

>

> G-RMAC Classic #109

>

>

Roland

Joined: 30 Nov 2009
Posts: 334
Location: EDLE

Posted: Mon Aug 17, 2015 12:14 am Post subject: Re: Any user feed back of f.u.n.k.e avionics?

Hi!



I also replaced my Microair through a Dittel KRT2 and am satisfied with it - price is reasonable, Dual watch and very lightweight. Some criticize the handling but I guess this is very individual.



Regards

Roland

PH-ZTI

XS Trigear 914

thoulihan(at)blueyonder.c
Guest

Posted: Mon Aug 17, 2015 1:05 am Post subject: Any user feed back of f.u.n.k.e avionics?

Hi.   

I replaced my Microair 760 with a Trig TT21 the flexibility that design has for installation is really useful , I already had a Trig transponder so I suppose matching the units was part of the decision . One thing about Trig is that their support is excellent in fact I would say even better than that. They upgraded my transponder to the current version to enable the ADS-b co-ordinates to be displayed, even though ADS-b had always been fully functional. They offered to do it even though it was not absolutely necessary and they turned it round within the day without charge. Very good service.   

regards   

Tim   

G-BZTH     	  Quote: 	
		      

On 17 August 2015 at 09:14 Roland <schmidtroland(at)web.de> wrote:--> Europa-List message posted by: "Roland" <schmidtroland(at)web.de>Hi!I also replaced my Microair through a Dittel KRT2 and am satisfied with it - price is reasonable, Dual watch and very lightweight. Some criticize the handling but I guess this is very individual.RegardsRolandPH-ZTIXS Trigear 914Read this topic online here:http://forums.matronics.com/viewtopic.php?p=446061#446061   	
   

>    [quote][b]

cakeykev(at)gmail.com
Guest

Posted: Mon Aug 17, 2015 1:46 am Post subject: Any user feed back of f.u.n.k.e avionics?

Hi

I am waiting for the Trig Nav/Com. 

I already have a Trig transponder mode S. I blew it up when testing completely my fault I managed to allow a live wire to touch the box. Trig fixed it free of charge even though my fault. No hassle and first class service. 



Kevin Challis

G ODJG 





On 17 Aug 2015, at 10:05, houlihan tim <thoulihan(at)blueyonder.co.uk (thoulihan(at)blueyonder.co.uk)> wrote:

[quote]              

Hi.   

I replaced my Microair 760 with a Trig TT21 the flexibility that design has for installation is really useful , I already had a Trig transponder so I suppose matching the units was part of the decision . One thing about Trig is that their support is excellent in fact I would say even better than that. They upgraded my transponder to the current version to enable the ADS-b co-ordinates to be displayed, even though ADS-b had always been fully functional. They offered to do it even though it was not absolutely necessary and they turned it round within the day without charge. Very good service.   

regards   

Tim   

G-BZTH     	  Quote: 	
		      

On 17 August 2015 at 09:14 Roland <schmidtroland(at)web.de (schmidtroland(at)web.de)> wrote:

--> Europa-List message posted by: "Roland" <schmidtroland(at)web.de (schmidtroland(at)web.de)>



Hi!



I also replaced my Microair through a Dittel KRT2 and am satisfied with it - price is reasonable, Dual watch and very lightweight. Some criticize the handling but I guess this is very individual.



Regards

Roland

PH-ZTI

XS Trigear 914





Read this topic online here:



http://forums.matronics.com/viewtopic.php?p=446061#446061



   	
   

 	  Quote: 	
		       	  Quote: 	
		  


	




	


[b]

pjeffers(at)talktalk.net
Guest

Posted: Mon Aug 17, 2015 4:46 am Post subject: Any user feed back of f.u.n.k.e avionics?

I too have TRIG units fitted now for 2 years with faultless and excellent performance.Â  One big plus for Trig is their second to none service. Â Initially when I fitted the Mode S transponder I had difficulties which eventually turned out to be my aerial connections.Â  Trig sent me a replacement unit as an elimination ploy, free of charge , 24 hr delivery.Â Â  

Regardless of price I rank TRIG units and the company very highly.

Pete

PS and they speak English (albeit with a Scottish accent)

 

From: owner-europa-list-server(at)matronics.com [mailto:owner-europa-list-server(at)matronics.com] On Behalf Of Kevin Challis

Sent: 17 August 2015 10:46

To: europa-list(at)matronics.com

Subject: Re: Re: Any user feed back of f.u.n.k.e avionics?

 

Hi



 



I am waiting for the Trig Nav/Com. 



 



I already have a Trig transponder mode S. I blew it up when testing completely my fault I managed to allow a live wire to touch the box. Trig fixed it free of charge even though my fault. No hassle and first class service. 



Kevin Challis



G ODJG 

 



On 17 Aug 2015, at 10:05, houlihan tim <thoulihan(at)blueyonder.co.uk (thoulihan(at)blueyonder.co.uk)> wrote:

 	  Quote: 	
		  

Hi.

I replaced my Microair 760 with a Trig TT21 the flexibility that design has for installation is really useful , I already had a Trig transponder so I suppose matching the units was part of the decision . One thing about Trig is that their support is excellent in fact I would say even better than that. They upgraded my transponder to the current version to enable the ADS-b co-ordinates to be displayed, even though ADS-b had always been fully functional. They offered to do it even though it was not absolutely necessary and they turned it round within the day without charge. Very good service.

regards

Tim

G-BZTH  	  Quote: 	
		  

On 17 August 2015 at 09:14 Roland <schmidtroland(at)web.de (schmidtroland(at)web.de)> wrote:

--> Europa-List message posted by: "Roland" <schmidtroland(at)web.de (schmidtroland(at)web.de)>



Hi!



I also replaced my Microair through a Dittel KRT2 and am satisfied with it - price is reasonable, Dual watch and very lightweight. Some criticize the handling but I guess this is very individual.



Regards

Roland

PH-ZTI

XS Trigear 914





Read this topic online here:



http://forums.matronics.com/viewtopic.php?p=446061#446061



	


 	  Quote: 	
		    	  Quote: 	
		     	


   	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8 	  Quote: 	
		   	
9 	  Quote: 	
		   	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6
	




No virus found in this message.

Checked by AVG - www.avg.com

Version: 2015.0.6086 / class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'>No virus found in this message.

Checked by AVG - www.avg.com

Version: 2015.0.6086 / 08/17/15

  [quote][b]

graeme bird

Joined: 15 Jul 2010
Posts: 434

Posted: Mon Aug 17, 2015 11:30 am Post subject: Re: Any user feed back of f.u.n.k.e avionics?

good service from the ATR883 and the TRT800H including intercom and dual watch (which is really useful).

Also had them in my C42.

_________________
Graeme Bird
kit4 (Wagstaff) TBD
Kit3 G-CLXU (Gregory) mono 914 xs Woodcomp
Kit2 G-PATS - (kesterton) Mono Classic 912 warpdrive
Kit 1 G-UMPY - Mono Classic/XS 912S, Woodcomp G(@)gdbmk.co.uk

Rick Moss

Joined: 21 Sep 2014
Posts: 96

Posted: Mon Aug 17, 2015 11:40 am Post subject: Re: Any user feed back of f.u.n.k.e avionics?

I used to have a Trig TT21 xpdr fitted next to my Funke ATR833; in bright sunlight I couldn't read the radio screen, but the transponder was perfectly visible. I now have a TY91 radio and am totally happy with it.

pete(at)lawless.info
Guest

Posted: Mon Aug 17, 2015 1:35 pm Post subject: Any user feed back of f.u.n.k.e avionics?

Thanks again one and all.  Lots of useful input - now just need to make 

a decision!



Pete



On 17/08/15 20:40, Rick Moss wrote:

 	  Quote: 	
		   



 I used to have a Trig TT21 xpdr fitted next to my Funke ATR833; in bright sunlight I couldn't read the radio screen, but the transponder was perfectly visible. I now have a TY91 radio and am totally happy with it.





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p=446085#446085

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum