 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
gengrumpy
Joined: 07 May 2013
Posts: 131
Location: Tullahoma, TN
|
 Posted: Wed Dec 09, 2015 10:05 am Post subject: Antisplat aero gust lock |
 |
|
If anyone has the Antisplat aero gust lock for their RV10, please send me an email on what you think of it.
Thanks - grumpy
N184JM - 9 yrs and still searching for the ultimate controls lock.
gengrumpy(at)aol.com (gengrumpy(at)aol.com)
DO NOT ARCHIVE
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
recapen(at)earthlink.net
Guest
|
| Posted: Wed Dec 09, 2015 10:22 am Post subject: Antisplat aero gust lock |
|
|
Grumpy,
I have one for my 6A if that is close enough.
I take it with me whenever I got some place to tie down.
Have not exposed it to heavy gusts - but the regular airport stuff is handled well.
The only deficiency that I can state is that it needs a bag to keep it from clanging around in the back.....maybe I'll call Bruce's custom covers and see if they'll sew something up.......
Ralph
--
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
gengrumpy
Joined: 07 May 2013
Posts: 131
Location: Tullahoma, TN
|
| Posted: Wed Dec 09, 2015 10:57 am Post subject: Antisplat aero gust lock |
|
|
So you think it’s worth the cost? Pretty pricey, but then again 9 years of looking for a good, lightweight easy to install control lock has not been very fruitful….
Grumpy
[quote] On Dec 9, 2015, at 12:15 PM, Ralph E. Capen <recapen(at)earthlink.net> wrote:
Grumpy,
I have one for my 6A if that is close enough.
I take it with me whenever I got some place to tie down.
Have not exposed it to heavy gusts - but the regular airport stuff is handled well.
The only deficiency that I can state is that it needs a bag to keep it from clanging around in the back.....maybe I'll call Bruce's custom covers and see if they'll sew something up.......
Ralph
--
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
rv10flyer(at)live.com
Guest
|
| Posted: Wed Dec 09, 2015 11:14 am Post subject: Antisplat aero gust lock |
|
|
I have no idea why I miss half of the posts these last few weeks. I actually
don’t even see the questions until someone replies.
Here is my review -
http://www.matronics.com/searching/getmsg_script.cgi?INDEX=120887155?KEYS=gust_lock?LISTNAME=RV10?HITNUMBER=27?SERIAL=1057496407?SHOWBUTTONS=YES
Since that review- I have been out in the desert where a multi had its
rudder smacking back and forth in 20-30kt gusts, while mine remained solid.
I was out in New Mexico last month and parked for a few days when I returned
my cover and overall aircraft was as I left it. Next to me was a Piper that
either had nothing or it failed. The owner was commenting on how he couldn’t
fly because the rudder broke in the thunderstorm that had past.
To Ralph's point- I leave mine behind the seat on the floor (carpeted)and
never have had an issue with it moving.
As my review states. It is a great product, I really like having it. My
wires are inside the stick so I have no issues with wire routing around
connector.
Pascal
--
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
recapen(at)earthlink.net
Guest
|
| Posted: Wed Dec 09, 2015 12:48 pm Post subject: Antisplat aero gust lock |
|
|
Wires inside the stick is a good point - yes, I built that in to mine also.....
--
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
recapen(at)earthlink.net
Guest
|
| Posted: Wed Dec 09, 2015 12:48 pm Post subject: Antisplat aero gust lock |
|
|
Pricey, yes - but I think it's worth it since it is a single item which when installed is in your way so you won't forget it......
I had to send mine back as it didn't fit right first time - I was asked to provide a couple of measurements and mine was adjusted, rewelded and re-anodized.....
--
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
rv10flyer(at)live.com
Guest
|
|
| Back to top |
|
|
rv10flyer(at)live.com
Guest
|
| Posted: Wed Dec 09, 2015 2:08 pm Post subject: Antisplat aero gust lock |
|
|
There are cheaper options but I don’t think there are better options than
the Antisplat. I used a nice light setup another builder made for me and it
worked well for the rudder but the Antisplat covers every moving part so
nothing moves in a storm.
I think its worth it.
Pascal
--
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Bob Turner
Joined: 03 Jan 2009
Posts: 885
Location: Castro Valley, CA
|
| Posted: Wed Dec 09, 2015 5:14 pm Post subject: Re: Antisplat aero gust lock |
|
|
An essentially zero cost (assuming you want a tow bar anyway) option is to use the Bogart tow bar, modified with two tabs, as a gust lock. This has been posted before. I've used this with zero problems.
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Bob Turner
RV-10 QB |
|
| Back to top |
|
|
jesse(at)saintaviation.co
Guest
|
| Posted: Wed Dec 09, 2015 6:10 pm Post subject: Antisplat aero gust lock |
|
|
Me too. Weld two tubes about 1" long extending the bars and they fit in the holes in the rudder pedals.
Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com
C: 352-427-0285
F: 815-377-3694
Sent from my iPhone
| Quote: | On Dec 9, 2015, at 8:14 PM, Bob Turner <bobturner(at)alum.rpi.edu> wrote:
An essentially zero cost (assuming you want a tow bar anyway) option is to use the Bogart tow bar, modified with two tabs, as a gust lock. This has been posted before. I've used this with zero problems.
--------
Bob Turner
RV-10 QB
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=450853#450853
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
rv10flyer(at)live.com
Guest
|
| Posted: Wed Dec 09, 2015 7:36 pm Post subject: Antisplat aero gust lock |
|
|
Not doing this myself, I question the hassle of getting out for the tow bar,
which mine sits in the baggage area than moving the plane into place with a
tow bar, or even if not, than going back into the plane to put the bar on
the pedals if parking for a while in windy conditions, than having to do
this all in reverse- go into plane take bar out, move the plane, all in
hopes that there isnt any wind to bang the rudder while pulling the plane
into position to start.
Having a gust lock in the plane guarantees that if its windy, and it has
been a few times in the west coast, I have everything secured BEFORE getting
out of the plane, I also don’t need to go back in and put the tow bar in the
plane. I have seen first hand a person move a plane in windy conditions and
the rudder banging. The Antisplat is the seatbelt around the stick and
towbar on the pedals. Sure that works, but I would rather skip the hassle
and know when I get out that the rudder and ailerons are not moving
anywhere. Yes, I would agree its an investment but in my mind its worth it.
There is also the PVC route to resolve the securing the plane before getting
out concern if looking for an inexpensive option.
Just some feedback for those wondering if Anti-splat gust lock is worth the
investment, certainly not disagreeing with anyone who has a working and
different way to do this. I once had an cheaper solution as well and I am
simply happier for my "upgrade".
Pascal
--
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
kearney
Joined: 20 Sep 2008
Posts: 563
|
| Posted: Sat Dec 12, 2015 3:33 pm Post subject: Re: Antisplat aero gust lock |
|
|
Hi
Since I have Paul Grimstad rudder pedals I wasn't sure if the "standard" options would work for me.
What I ended up doing was installing an eye bolt in an open AN3 hole in the u channel at the base of the firewall. I use that as an anchor point through which a bungee cord is used to pull both pedals forward. The end of the bungee is secured to one of the gear legs arms that is in the corner of the foot well.
I used this at KOSH and it seems to have worked quite well. I especially like that the bungee has some "give". I found one bungee was too loose but two held a nice tension.
For the elevators I just use another bungee wrapped around the seat to hold the stick back
See the pix below.
Cheers
Les
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
17.58 KB |
| Viewed: |
14810 Time(s) |
|
| Description: |
|
| Filesize: |
37.87 KB |
| Viewed: |
14810 Time(s) |
|
| Description: |
|
| Filesize: |
34.99 KB |
| Viewed: |
14810 Time(s) |
|
| Description: |
|
| Filesize: |
45.81 KB |
| Viewed: |
14810 Time(s) |
|
|
|
| Back to top |
|
|
bill.peyton
Joined: 19 Sep 2010
Posts: 198
Location: St. Louis, MO
|
| Posted: Sun Dec 13, 2015 7:08 am Post subject: Re: Antisplat aero gust lock |
|
|
Here is my $15 solution that has worked for 3 years without fail.
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
101.96 KB |
| Viewed: |
14787 Time(s) |
|
| Description: |
|
| Filesize: |
117 KB |
| Viewed: |
14786 Time(s) |
|
| Description: |
|
| Filesize: |
112.83 KB |
| Viewed: |
14786 Time(s) |
|
| Description: |
|
| Filesize: |
87.79 KB |
| Viewed: |
14786 Time(s) |
|
| Description: |
|
| Filesize: |
98.15 KB |
| Viewed: |
14786 Time(s) |
|
| Description: |
|
| Filesize: |
92.33 KB |
| Viewed: |
14786 Time(s) |
|
| Description: |
|
| Filesize: |
109.5 KB |
| Viewed: |
14786 Time(s) |
|
_________________
Bill
WA0SYV
Aviation Partners, LLC |
|
| Back to top |
|
|
Mauledriver(at)nc.rr.com
Guest
|
| Posted: Sun Dec 13, 2015 8:02 am Post subject: Antisplat aero gust lock |
|
|
I think I've posted this before, but here is my <$200 [url=http://www.mykitlog.com/users/display_log.php?user=MauleDriver&project=224&category=0&log 0875&row=3]Bogi-Bar solution[/url] that does double duty.
Worked for a year unmodified, then worked even better in modified form for the past year.
Bill Watson
On 12/13/2015 10:08 AM, bill.peyton wrote:
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
toaster73(at)embarqmail.c
Guest
|
| Posted: Mon Dec 14, 2015 6:36 pm Post subject: Antisplat aero gust lock |
|
|
I think I did see one of this design (PVC) fail at OSH this year. There was
quite a thunderstorm /windstorm that came through Friday night before the
show. I think the PVC snapped on the long part.
-Chris Lucas
N919AR
--
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
jesse(at)saintaviation.co
Guest
|
| Posted: Mon Dec 14, 2015 11:49 pm Post subject: Antisplat aero gust lock |
|
|
I have a destroyed rudder in my shop from a failed pvc gust lock. For short stops in non-stormy conditions, they may be fine, but please please please don't trust them over a weekend or any time there are going to be relatively high winds.
Jesse Saint
Saint Aviation, Inc.
352-427-0285
jesse(at)saintaviation.com
Sent from my iPad
[quote] On Dec 15, 2015, at 4:32 AM, Chris <toaster73(at)embarqmail.com> wrote:
I think I did see one of this design (PVC) fail at OSH this year. There was
quite a thunderstorm /windstorm that came through Friday night before the
show. I think the PVC snapped on the long part.
-Chris Lucas
N919AR
--
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
bill.peyton
Joined: 19 Sep 2010
Posts: 198
Location: St. Louis, MO
|
| Posted: Tue Dec 15, 2015 6:08 am Post subject: Re: Antisplat aero gust lock |
|
|
One of the first PVC units that I fabricated used a much smaller diameter PVC for the long pipe. I did not like the strength that it exhibited, so I used this larger dia. pipe.
I may do some destructive testing on an older prototype to see how much force it may take to snap it.
Thanks for the input
Bill
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Bill
WA0SYV
Aviation Partners, LLC |
|
| Back to top |
|
|
Lenny Iszak
Joined: 23 Mar 2008
Posts: 270
|
| Posted: Tue Dec 15, 2015 6:13 am Post subject: Re: Antisplat aero gust lock |
|
|
My modified (to fit my pedals) Gust Off gust lock broke in half in that storm. As a backup I had a pair of AirGizmos control locks, the one on the elevator came off. It had the older style cam, and they replaced it at the show to the new one, no charge.
Luckily the plane didn't get damaged at all.
Base velocity on RadarScope was showing 50-60 mph winds.
Lenny
| toaster73(at)embarqmail.c wrote: | I think I did see one of this design (PVC) fail at OSH this year. There was
quite a thunderstorm /windstorm that came through Friday night before the
show. I think the PVC snapped on the long part.
-Chris Lucas
N919AR
-- |
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
276.76 KB |
| Viewed: |
14705 Time(s) |
|
| Description: |
|
| Filesize: |
300.41 KB |
| Viewed: |
14705 Time(s) |
|
|
|
| Back to top |
|
|
partner14
Joined: 12 Jan 2008
Posts: 540
Location: Granbury Texas
|
| Posted: Tue Dec 15, 2015 7:34 am Post subject: Antisplat aero gust lock |
|
|
Ok, here's my 6cents.
Pic1: My standard for short stays
Pic2: Elevator bracket for long stays/windy conditions.
Pic3: Rudder, long stays/windy conditions
Pic4: Parts required for long stays/windy conditions
Pros:
Cost = almost nothing
Reliability = 100%
Weight = almost nothing
Space required = almost nothing
Cons:
You have to make them
Don McDonald
800 hours and lovin' almost every minute.
[img]cid:de853095-df0c-e289-6d01-bbecac4ae1ab(at)yahoo.com[/img]
[img]cid:d9830995-fc83-a276-4fd2-67749104c4e4(at)yahoo.com[/img]
[img]cid:34f4d10a-8009-d542-1865-0dfa9a52797a(at)yahoo.com[/img]
[img]cid:4d897a72-42f9-401e-0255-b186ad7c052e(at)yahoo.com[/img]
From: Lenny Iszak <lenard(at)rapiddecision.com>
To: rv10-list(at)matronics.com
Sent: Tuesday, December 15, 2015 8:13 AM
Subject: Re: Antisplat aero gust lock
--> RV10-List message posted by: "Lenny Iszak" <lenard(at)rapiddecision.com (lenard(at)rapiddecision.com)>
My modified (to fit my pedals) Gust Off gust lock broke in half in that storm. As a backup I had a pair of AirGizmos control locks, the one on the elevator came off. It had the older style cam, and they replaced it at the show to the new one, no charge.
Luckily the plane didn't get damaged at all.
Base velocity on RadarScope was showing 50-60 mph winds.
Lenny
toaster73(at)embarqmail.c wrote:
| Quote: | I think I did see one of this design (PVC) fail at OSH this year. There was
quite a thunderstorm /windstorm that came through Friday night before the
show. I think the PVC snapped on the long part.
-Chris Lucas
N919AR
--
|
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=450973#450973
Attachments:
http://forums.matronics.com//files/img_7354_150.jpg
http://forums.matronics.comtronics.com/contribution" target="_blank">http://www.matronics.com/contrip; -Matt Dralle, List Admin.
_t; <a href="http://www.matronics.com/Navigator?RV10-List" target="_blanp; -Matt Dralle, Li==========
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
245.01 KB |
| Viewed: |
14697 Time(s) |
|
| Description: |
|
| Filesize: |
186.83 KB |
| Viewed: |
14697 Time(s) |
|
| Description: |
|
| Filesize: |
535.67 KB |
| Viewed: |
14697 Time(s) |
|
| Description: |
|
| Filesize: |
529.41 KB |
| Viewed: |
14697 Time(s) |
|
_________________
Don A. McDonald
40636 |
|
| Back to top |
|
|
carl.froehlich(at)verizon
Guest
|
| Posted: Tue Dec 15, 2015 8:45 am Post subject: Antisplat aero gust lock |
|
|
I've seen various examples of failed rudder locks that used the rudder horns
and/or rudder cables. The common failure seemed to be not considering the
rudder's large leverage arm when applying force opposite of normal
operations (e.g. wind gusts). I ended up with this simple but effective
solution that takes advantage of this lever arm.
The line loops around the middle elevator hinge (make sure you use a Bowline
knot for this for easy removal). Once the line is in place I lock the
elevators up with the pilot seat belt - and then attach the padded angle on
the trailing edge of the rudder.
This has worked well for two airplanes over 13 years.
Carl
--
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
52.86 KB |
| Viewed: |
14692 Time(s) |
|
| Description: |
|
| Filesize: |
50.21 KB |
| Viewed: |
14692 Time(s) |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
