Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

My Firestar 2 Build
Goto page Previous 1, 2, 3, 4 Next

Matronics Email Lists Forum Index -> Kolb-List

View previous topic :: View next topic

Author Message

victorbravo(at)sbcglobal.
Guest

Posted: Mon Oct 29, 2018 3:48 pm Post subject: My Firestar 2 Build

I believe Helen Melborn told me the number stamped on the rear edge of the motoe mount tube is the steel cage we;dment number, which is not sautomatically the same as the aircraft serial number???



Bill Berle

www.ezflaphandle.com  - safety & performance upgrade for light aircraft

www.grantstar.net           - winning proposals for non-profit and for-profit entities



--------------------------------------------

On Mon, 10/29/18, George Helton <gdhelton(at)gmail.com> wrote:



 Subject: Re: Re: My Firestar 2 Build

 To: kolb-list(at)matronics.com

 Date: Monday, October 29, 2018, 4:21 PM

 

 

 Helton <gdhelton(at)gmail.com>

 

 If you can find original plans, it the

 plans number. Like mine is FS100. The 100th original

 Firestar. 

 George H.

  Firestar, FS100, 2702 Hirth

 14GDH

 Mesick , Michigan 

 gdhelton(at)gmail.com

 

 

 Sent from my iPhone

 

 > On Oct 29, 2018, at 6:41 PM,

 loctupdave <loctupdave(at)att.net>

 wrote:

 > 

 > --> Kolb-List message posted

 by: "loctupdave" <loctupdave(at)att.net>

 > 

 > Thank you for the replies. I

 checked the motor mount tube, nothing there. I guess I will

 make my own serial number.

 > 

 > 

 > 

 > 

 > Read this topic online here:

 > 

 > http://forums.matronics.com/viewtopic.php?p=484080#484080

 > 

 > 

 > 

 > 

 > 

 > 

 > 

 > 

 > 

 

 The Kolb-List Email Forum -

 Navigator to browse

 List Un/Subscription,

 7-Day Browse, Chat, FAQ,

      - MATRONICS WEB FORUMS -

 via the Web Forums!

     - NEW MATRONICS LIST WIKI -

 Email List Wiki!

    - List Contribution Web Site -

 support!

                

     -Matt Dralle, List Admin.

mojavjoe

Joined: 23 Dec 2013
Posts: 64

Posted: Tue Oct 30, 2018 4:46 am Post subject: My Firestar 2 Build

I agree with Bill. Mine was marked FS001 and I'm sure it was not the first Firestar.

Joe



 	  Quote: 	
		    > 

  > Thank you for the replies. I

  checked the motor mount tube, nothing there. I guess I will

  make my own serial number.

  > 

  > 

  > 

  > 

  > Read this topic online here:

  > 

  > http://forums.matronics.com/viewtopic.php?p=484080#484080

  > 

  > 

  > 

  > 

  > 

  > 

  > 

  > 

  > 

  

  The Kolb-List Email Forum -

  Navigator to browse

  List Un/Subscription,

  7-Day Browse, Chat, FAQ,

       - MATRONICS WEB FORUMS -

  via the Web Forums!

      - NEW MATRONICS LIST WIKI -

  Email List Wiki!

     - List Contribution Web Site -

  support!

                 

      -Matt Dralle, List Admin.

John Hauck

Joined: 09 Jan 2006
Posts: 4639
Location: Titus, Alabama (hauck's holler)

Posted: Tue Oct 30, 2018 5:32 am Post subject: My Firestar 2 Build

To the best of my knowledge the first Fire Star is in Homer Kolb's hanger in Springville, PA.  I watched Dick Rahill crash it at Oshkosh in 1989.  Homer completely rebuilt the first Firestar not long before he passed.  Got to fly it at Sun and Fun 1986 or 87, then again at the Kolb Farm in 2008 (?).  Was powered by a Rotax 377 originally, replaced with a 503 DC when rebuilt.  Also had VGs.



john h

mkIII

Titus, Alabama





--

_________________
John Hauck
MKIII/912ULS
hauck's holler
Titus, Alabama

loctupdave

Joined: 01 Sep 2018
Posts: 25

Posted: Tue Oct 30, 2018 10:46 am Post subject: Re: My Firestar 2 Build

The previous owner did not have much in the way 

 of information. The plans I do have I bought from Kolb. Like I said. it looks like I will have to make my own serial number. 



 	  gdhelton(at)gmail.com wrote: 	
		  If you can find original plans, it the plans number. Like mine is FS100. The 100th original Firestar. 

George H.

 Firestar, FS100, 2702 Hirth

14GDH

Mesick , Michigan 

gdhelton(at)gmail.com

Sent from my iPhone



 	  Quote: 	
		   On Oct 29, 2018, at 6:41 PM, loctupdave <loctupdave> wrote:

 

 

 

 Thank you for the replies. I checked the motor mount tube, nothing there. I guess I will make my own serial number.

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=484080#484080

ceengland7(at)gmail.com
Guest

Posted: Tue Oct 30, 2018 12:42 pm Post subject: My Firestar 2 Build

Is this a previously registered a/c? If so, the serial number in the 

eyes of the FAA is on the registration paperwork. There is no 

requirement that it match Kolb's number (the person who registered it 

could have called it a <buldername> Blowhard serial number 10,000), but 

there *is* a requirement that your data plate matches the registration.

On 10/30/2018 1:46 PM, loctupdave wrote:

 	  Quote: 	

 The previous owner did not have much in the way

   of information. The plans I do have I bought from Kolb. Like I said. it looks like I will have to make my own serial number.

 gdhelton(at)gmail.com wrote:

> If you can find original plans, it the plans number. Like mine is FS100. The 100th original Firestar.

> George H.

>   Firestar, FS100, 2702 Hirth

> 14GDH

> Mesick , Michigan

> gdhelton(at)gmail.com

> Sent from my iPhone

>>   On Oct 29, 2018, at 6:41 PM, loctupdave  wrote:

>>   

>>   

>>   

>>   Thank you for the replies. I checked the motor mount tube, nothing there. I guess I will make my own serial number.

>>   

---

This email has been checked for viruses by Avast antivirus software.

https://www.avast.com/antivirus

gdhelton(at)gmail.com
Guest

Posted: Tue Oct 30, 2018 12:49 pm Post subject: My Firestar 2 Build

Yup, sounds like you get to be creative. 

George H.

Firestar 

Mesick, Michigan 



Sent from my iPhone



 	  Quote: 	
		   On Oct 30, 2018, at 2:46 PM, loctupdave <loctupdave(at)att.net> wrote:

 

 

 

 The previous owner did not have much in the way 

 of information. The plans I do have I bought from Kolb. Like I said. it looks like I will have to make my own serial number. 

 

 

 gdhelton(at)gmail.com wrote:

> If you can find original plans, it the plans number. Like mine is FS100. The 100th original Firestar. 

> George H.

> Firestar, FS100, 2702 Hirth

> 14GDH

> Mesick , Michigan 

> gdhelton(at)gmail.com

> 

> 

> Sent from my iPhone

> 

> 

>> On Oct 29, 2018, at 6:41 PM, loctupdave  wrote:

>> 

>> 

>> 

>> Thank you for the replies. I checked the motor mount tube, nothing there. I guess I will make my own serial number.

>> 

>> 

>> 

>> 

>> Read this topic online here:

>> 

>> http://forums.matronics.com/viewtopic.php?p=484080#484080

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

> 

 

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=484096#484096

loctupdave

Joined: 01 Sep 2018
Posts: 25

Posted: Tue Oct 30, 2018 1:10 pm Post subject: Re: My Firestar 2 Build

With what I have for information this plane has never had a N number. There is no data plate or evidence of a N number removal.

ceengland7(at)gmail.com
Guest

Posted: Tue Oct 30, 2018 1:32 pm Post subject: My Firestar 2 Build

On Tue, Oct 30, 2018 at 4:12 PM loctupdave <loctupdave(at)att.net (loctupdave(at)att.net)> wrote:



 	  Quote: 	
		  --> Kolb-List message posted by: "loctupdave" <loctupdave(at)att.net (loctupdave(at)att.net)>

 

 With what I have for information this plane has never had a N number. There is no data plate or evidence of a N number removal.

 

If it's never been registered, and you intend to register it as a homebuilt, then you get to pick the model name and serial number when you register it. Be prepared to show some kind of chain of ownership of the 'project', or a document signed by you stating that it was built from 'parts', meaning scratch built. You'll have to do the 51% checklist, etc. 	




If you intend to fly it as an ultralite, all the above is moot.

Charlie

 	  Quote:

loctupdave

Joined: 01 Sep 2018
Posts: 25

Posted: Tue Oct 30, 2018 1:56 pm Post subject: Re: My Firestar 2 Build

It would be wonderful knowing the year it was made.

Jerry-TS-MkII

Joined: 23 Aug 2017
Posts: 79
Location: Indiana

Posted: Tue Oct 30, 2018 2:22 pm Post subject: Re: My Firestar 2 Build

RE: SN..

Was this ever registered before?  Or was it flown as a U/L?  If it's ever been registered, the FAA should have a SN associated with the plane/paperwork.  

Jerry

loctupdave

Joined: 01 Sep 2018
Posts: 25

Posted: Tue Oct 30, 2018 2:55 pm Post subject: Re: My Firestar 2 Build

I cannot see anything on the plane or information given that would suggest it has been restored by the FAA.

Jerry-TS-MkII

Joined: 23 Aug 2017
Posts: 79
Location: Indiana

Posted: Tue Oct 30, 2018 7:43 pm Post subject: Re: My Firestar 2 Build

If you know the original builder.. Kolb might have records of who bought kits or plans?  I'm not sure of when they changed ownership.. so that could be a problem, but might be worth a try.  It may not be an issue, if it's never been registered.  I know with a U/L transition to ELSA, it was "pick a number" and put it on the airplane and related documents.



Jerry

gdhelton(at)gmail.com
Guest

Posted: Tue Oct 30, 2018 7:55 pm Post subject: My Firestar 2 Build

If you’re going to fly it as a ultralight, it’s a non-issue except I.D. purposes anyway.

George H.

Firestar 

14GDH 

Mesick, Michigan 



Sent from my iPhone



 	  Quote: 	
		   On Oct 30, 2018, at 11:43 PM, Jerry-TS-MkII <12flybellaire(at)gmail.com> wrote:

 

 

 

 If you know the original builder.. Kolb might have records of who bought kits or plans?  I'm not sure of when they changed ownership.. so that could be a problem, but might be worth a try.  It may not be an issue, if it's never been registered.  I know with a U/L transition to ELSA, it was "pick a number" and put it on the airplane and related documents.

 

 Jerry

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=484110#484110

johngilpin

Joined: 23 Mar 2011
Posts: 93
Location: 004

Posted: Wed Oct 31, 2018 1:24 am Post subject: My Firestar 2 Build

That was the aircraft that I used for the travels that I did over in the USA in 2013,14,15. I flew it as an ultralight, and to my knowledge it never had been registered. The previous owner also flew it as an ultralight. He had no information as to it's history and no paperwork. I just took it 'as is' and hit the road and the air, and it served me well. 



The vertical stab had been modified in a very distinctive way, and the trailer is also very distinctive. These features can be seen in the blog http://jgflyingroadtrip2013.blogspot.com/  Someone may remember seeing these features in the past and might be able to bring up some history.... 

JG

John Hauck

Joined: 09 Jan 2006
Posts: 4639
Location: Titus, Alabama (hauck's holler)

Posted: Wed Oct 31, 2018 6:03 am Post subject: My Firestar 2 Build

JG/Kolbers:

 

What an adventurer you are.  I know the difficulties of planning, building, and flying cross country flights in a Kolb.  No way I would ever attempt to do the trips that you have done.  Was sitting here reading your blog wondering what it would be like if I decided to go to Australia and do the same thing you have done several times here in the US.  The foreseeable and unforeseeable problems are monumental.

 

Glad we got to spend time together sharing travel stories on a couple of your trips.

 

john h

mkIII

Titus, Alabama

 

From: owner-kolb-list-server(at)matronics.com [mailto:owner-kolb-list-server(at)matronics.com] On Behalf Of JC Gilpin

Sent: Wednesday, October 31, 2018 3:18 AM

To: kolb-list(at)matronics.com

Subject: Re: My Firestar 2 Build



 

That was the aircraft that I used for the travels that I did over in the USA in 2013,14,15. I flew it as an ultralight, and to my knowledge it never had been registered. The previous owner also flew it as an ultralight. He had no information as to it's history and no paperwork. I just took it 'as is' and hit the road and the air, and it served me well. 

 



The vertical stab had been modified in a very distinctive way, and the trailer is also very distinctive. These features can be seen in the blog http://jgflyingroadtrip2013.blogspot.com/  Someone may remember seeing these features in the past and might be able to bring up some history.... 



 



JG

_________________
John Hauck
MKIII/912ULS
hauck's holler
Titus, Alabama

west1m

Joined: 19 Apr 2014
Posts: 155
Location: Hastings, MN

Posted: Thu Nov 01, 2018 2:04 pm Post subject: Re: My Firestar 2 Build

 	  victorbravo(at)sbcglobal. wrote: 	
		  I believe Helen Melborn told me the number stamped on the rear edge of the motoe mount tube is the steel cage we;dment number, which is not sautomatically the same as the aircraft serial number???



Bill Berle

www.ezflaphandle.com  - safety & performance upgrade for light aircraft

www.grantstar.net           - winning proposals for non-profit and for-profit entities



--------------------------------------------

On Mon, 10/29/18, George Helton <gdhelton> wrote:



 Subject: Re: Re: My Firestar 2 Build

 To: kolb-list(at)matronics.com

 Date: Monday, October 29, 2018, 4:21 PM

 

 

 Helton <gdhelton>

 

 If you can find original plans, it the

 plans number. Like mine is FS100. The 100th original

 Firestar. 

 George H.

  Firestar, FS100, 2702 Hirth

 14GDH

 Mesick , Michigan 

 gdhelton(at)gmail.com

 

 

 Sent from my iPhone

 

 > On Oct 29, 2018, at 6:41 PM,

 loctupdave <loctupdave>

 wrote:

 > 

 > --> Kolb-List message posted

 by: "loctupdave" <loctupdave>

 > 

 > Thank you for the replies. I

 checked the motor mount tube, nothing there. I guess I will

 make my own serial number.

 > 

 > 

 > 

 > 

 > Read this topic online here:

 > 

 > http://forums.matronics.com/viewtopic.php?p=484080#484080

 > 

 > 

 > 

 > 

 > 

 > 

 > 

 > 

 > 

 

 The Kolb-List Email Forum -

 Navigator to browse

 List Un/Subscription,

 7-Day Browse, Chat, FAQ,

      - MATRONICS WEB FORUMS -

 via the Web Forums!

     - NEW MATRONICS LIST WIKI -

 Email List Wiki!

    - List Contribution Web Site -

 support!

                

     -Matt Dralle, List Admin. 	


I wonder about your FS100 number, model Number? My old 

firestar plans have that number on them as well

fS1032.jpg

Description:

Filesize:

229.32 KB

Viewed:

18984 Time(s)

fS100.jpg

Description:

Filesize:

256.18 KB

Viewed:

18984 Time(s)

_________________
West1m
Hastings, MN

loctupdave

Joined: 01 Sep 2018
Posts: 25

Posted: Sat Nov 10, 2018 8:01 am Post subject: Re: My Firestar 2 Build

does anyone know what purpose this tab serves. I plan to cover this into a full canopy and it will be in the way. My thought is to cut it off. 



distant pic







up close

lcottrell

Joined: 29 May 2006
Posts: 1494
Location: Jordan Valley, Or

Posted: Sat Nov 10, 2018 9:17 am Post subject: My Firestar 2 Build

I believe that it was intended for the enrichner lever.

Larry

On Sat, Nov 10, 2018 at 9:05 AM loctupdave <loctupdave(at)att.net (loctupdave(at)att.net)> wrote:



 	  Quote: 	
		  --> Kolb-List message posted by: "loctupdave" <loctupdave(at)att.net (loctupdave(at)att.net)>

 

 does anyone know what purpose this tab serves. I plan to cover this into a full canopy and it will be in the way. My thought is to cut it off. 

 

 distant pic

 

  (http://s275.photobucket.com/user/dngspot/media/tab_zpsstruv6nl.jpg.html)

 

 up close 

 

  (http://s275.photobucket.com/user/dngspot/media/tab%20close%20up_zpsslfb55xw.jpg.html)

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=484742#484742

 

 

 

 

 

 

 ===========

 br> fts!)

 r> > e.com" rel="noreferrer" target="_blank">www.mypilotstore.com

 rel="noreferrer" target="_blank">http://www.matronics.com/contribution

           -Matt Dralle, List Admin.

 ===========

 -List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?Kolb-List

 ===========

  FORUMS -

 eferrer" target="_blank">http://forums.matronics.com

 ===========

 WIKI -

 errer" target="_blank">http://wiki.matronics.com

 ===========

 b Site -

           -Matt Dralle, List Admin.

 rel="noreferrer" target="_blank">http://www.matronics.com/contribution

 ===========

 

 

 

 	


-- 

The older I get, the less tolerant I am of those who are intolerant of others.





If you forward this email, or any part of it, please remove my email address before sending.

_________________
do not archive

rascaljohn

Joined: 02 May 2013
Posts: 23

Posted: Sat Nov 10, 2018 9:17 am Post subject: My Firestar 2 Build

I think this was meant for a remote choke lever.

 After painting and covering my fs ll fuselage cage I then began adding all the interior items... and then wished that I had planned ahead. Small tabs could have been added for mounting floor panels, windscreen and windows, etc. I used a throttle quadrant that really would have been a simpler install if only there was a mounting tab... 

Is yours a fs l or ll ? The fs ll has a 1/2” horizontal tube that runs just in front of where the 5”tail boom spar attaches; the fabric seat swoops under this. I was contacted by Kolb Co. several years ago advising that the tube welds were cracking and a sliding splice would allow movement but still support the fabric. I saw a need for 4 additional pulleys to raise the rudder/elevator cables as they entered the tail boom. This sliding splice was part of my new pulley housing...much easier before paint and fabric. Also, the center wing gap seal would be a good place to look at. 

Check with Kolb regarding the horizontal tube modification. 

John Fitt 



Sent from my iPhone



 	  Quote: 	
		   On Nov 10, 2018, at 8:01 AM, loctupdave <loctupdave(at)att.net> wrote:

 

 

 

 does anyone know what purpose this tab serves. I plan to cover this into a full canopy and it will be in the way. My thought is to cut it off. 

 

 distant pic

 

 (http://s275.photobucket.com/user/dngspot/media/tab_zpsstruv6nl.jpg.html)

 

 up close 

 

 (http://s275.photobucket.com/user/dngspot/media/tab%20close%20up_zpsslfb55xw.jpg.html)

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=484742#484742

loctupdave

Joined: 01 Sep 2018
Posts: 25

Posted: Sat Nov 10, 2018 11:44 am Post subject: Re: My Firestar 2 Build

Thanks John. 

My Firestar is a fs2. As for the choke, my engine has them, but they will not be used, as there is a priming system. I have a Quick Silver that has this system, when I built the engine and carb, I removed the choke and used gasket maker to plug the hole. With the priming system give it a couple squirts and she starts up in a couple of pulls. As for the floor the front is done. Im not sure if I will floor the back.

Display posts from previous:

	Matronics Email Lists Forum Index -> Kolb-List	All times are GMT - 8 Hours Goto page Previous 1, 2, 3, 4 Next
Page 2 of 4

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum