Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

what hose for expansion tank to overflow bottle?

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
rowlandcarson(at)gmail.co
Guest
PostPosted: Mon Feb 10, 2020 8:44 am    Post subject: what hose for expansion tank to overflow bottle? Reply with quote
I am not sure if there was a hose suppled with my Rotax 912S to connect between the expansion tank and the (Rotax-supplied) overflow bottle, nor can I find anything of that nature in my inventory of parts supplied by Europa Aircraft. Before I spend a lot of time looking for something which may be non-existent, can anyone confirm whether such a hose is supplied by Rotax with the engine, or if Europa supply it?

Supplementary question - if I have to procure that hose, can anyone suggest a suitable type available in UK? The Rotax manual specifies:

Hose connecting expansion tank to overflow bottle must be rated for vacuum/suction for min. 125 °C (257 °F). E.g. it must be strong enough to withstand high heat and suction during the cooling down period. WARNING: A soft walled hose is not suitable as it can collapse and cause coolant system failure.
Size . . . of connections: expansion tank to overflow bottle outside dia. 8 mm (3/8”).

Any thoughts welcome!

in friendship

Rowland

| Rowland Carson ... that's Rowland with a 'w' ...
| <rowlandcarson(at)gmail.com> http://www.rowlandcarson.org.uk
| Skype, Twitter: rowland_carson Facebook: Rowland Carson

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
Burrilla



Joined: 25 Apr 2015
Posts: 184
PostPosted: Mon Feb 10, 2020 9:01 am    Post subject: what hose for expansion tank to overflow bottle? Reply with quote
I have seen a lot of people use 6mm fuel hose which is in the kit but wondered if steam hose, silicon, would be suitable.

https://www.hoseworld.com/6mm-i-d-silicone-rubber-tubing-sil-06-10.html
Alan Burrill

Sent from my iPad

Quote:
On 10 Feb 2020, at 16:46, Rowland Carson <rowlandcarson(at)gmail.com> wrote:

--> Europa-List message posted by: Rowland Carson <rowlandcarson(at)gmail.com>

I am not sure if there was a hose suppled with my Rotax 912S to connect between the expansion tank and the (Rotax-supplied) overflow bottle, nor can I find anything of that nature in my inventory of parts supplied by Europa Aircraft. Before I spend a lot of time looking for something which may be non-existent, can anyone confirm whether such a hose is supplied by Rotax with the engine, or if Europa supply it?

Supplementary question - if I have to procure that hose, can anyone suggest a suitable type available in UK? The Rotax manual specifies:

Hose connecting expansion tank to overflow bottle must be rated for vacuum/suction for min. 125 °C (257 °F). E.g. it must be strong enough to withstand high heat and suction during the cooling down period. WARNING: A soft walled hose is not suitable as it can collapse and cause coolant system failure.
Size . . . of connections: expansion tank to overflow bottle outside dia. 8 mm (3/8”).

Any thoughts welcome!

in friendship

Rowland

| Rowland Carson ... that's Rowland with a 'w' ...
| <rowlandcarson(at)gmail.com> http://www.rowlandcarson.org.uk
| Skype, Twitter: rowland_carson Facebook: Rowland Carson


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message
rowlandcarson(at)gmail.co
Guest
PostPosted: Mon Feb 10, 2020 9:37 am    Post subject: what hose for expansion tank to overflow bottle? Reply with quote
On 2020-02-10, at 16:59, Alan Burrill <alanb(at)dpy01.co.uk> wrote:
Quote:
I have seen a lot of people use 6mm fuel hose which is in the kit but wondered if steam hose, silicon, would be suitable.


Alan - thanks for the suggestions.

I had considered silicon tubing but discarded the idea as most of the examples I’ve handled seem to collapse rather easily under vacuum. I imagine “steam hose” expects to have positive pressure inside all the time!

I certainly have plenty of 6mm (and indeed 8mm) fuel hose lying around spare because I have used a combination of solid aluminium pipe and SS braided hose for my fuel system. I’ll see how much of a push it takes to get the 6mm fuel hose onto the 8mm expansion tank outlet.

in friendship

Rowland

| Rowland Carson ... that's Rowland with a 'w' ...
| <rowlandcarson(at)gmail.com> http://www.rowlandcarson.org.uk
| Skype, Twitter: rowland_carson Facebook: Rowland Carson

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
kingsnjan(at)westnet.com.
Guest
PostPosted: Tue Feb 11, 2020 3:39 am    Post subject: what hose for expansion tank to overflow bottle? Reply with quote
Hello Rowland,

I am at a loss to know what would cause suction in the overflow hose.

Presumably you know there were instructions years ago to increase the size of the hole in the lid of the overflow bottle. If that hole is clear, I don’t see how there could ever be pressure or suction in the
overflow hose.

I am using a piece of clear plastic tubing and not having any problems but if I could find a better quality clear tubing, I would use it.

Regards
Kingsley in Oz.

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
peterz(at)zutrasoft.com
Guest
PostPosted: Tue Feb 11, 2020 3:50 am    Post subject: what hose for expansion tank to overflow bottle? Reply with quote
I believe the only suction would be that required to pull the fluid from the overflow bottle back into the cap-tank during cool-down. If the tank is close to the same level, the suction would be trivial if it could be measured at all.
Cheers,
Pete

On Tue, Feb 11, 2020 at 6:45 AM Kingsley Hurst <kingsnjan(at)westnet.com.au (kingsnjan(at)westnet.com.au)> wrote:

Quote:
--> Europa-List message posted by: Kingsley Hurst <kingsnjan(at)westnet.com.au (kingsnjan(at)westnet.com.au)>

Hello Rowland,

I am at a loss to know what would cause suction in the overflow hose. 

Presumably you know there were instructions years ago to increase the size of the hole in the lid of the overflow bottle. If that hole is clear, I don’t see how there could ever be pressure or suction in the
overflow hose.

I am using a piece of clear plastic tubing and not having any problems but if I could find a better quality clear tubing, I would use it.

Regards
Kingsley in Oz.

===========
br> fts!)
r> > rel="noreferrer" target="_blank">http://www.matronics.com/contribution
          -Matt Dralle, List Admin.
===========
pa-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?Europa-List
===========
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
===========
WIKI -
errer" target="_blank">http://wiki.matronics.com
===========
b Site -
          -Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
===========





- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
wdaniell.longport(at)gmai
Guest
PostPosted: Tue Feb 11, 2020 3:52 am    Post subject: what hose for expansion tank to overflow bottle? Reply with quote
I was assuming that the suction occurs when the coolant cools and contracts.... but presumably that would not occurr in the air...?

I use a piece of fuel hose.

William Daniell
+1 786 878 0246

On Tue, Feb 11, 2020, 06:41 Kingsley Hurst <kingsnjan(at)westnet.com.au (kingsnjan(at)westnet.com.au)> wrote:

Quote:
--> Europa-List message posted by: Kingsley Hurst <kingsnjan(at)westnet.com.au (kingsnjan(at)westnet.com.au)>

Hello Rowland,

I am at a loss to know what would cause suction in the overflow hose. 

Presumably you know there were instructions years ago to increase the size of the hole in the lid of the overflow bottle. If that hole is clear, I don’t see how there could ever be pressure or suction in the
overflow hose.

I am using a piece of clear plastic tubing and not having any problems but if I could find a better quality clear tubing, I would use it.

Regards
Kingsley in Oz.

===========
br> fts!)
r> > rel="noreferrer noreferrer" target="_blank">http://www.matronics.com/contribution
          -Matt Dralle, List Admin.
===========
pa-List" rel="noreferrer noreferrer" target="_blank">http://www.matronics.com/Navigator?Europa-List
===========
FORUMS -
eferrer noreferrer" target="_blank">http://forums.matronics.com
===========
WIKI -
errer noreferrer" target="_blank">http://wiki.matronics.com
===========
b Site -
          -Matt Dralle, List Admin.
rel="noreferrer noreferrer" target="_blank">http://www.matronics.com/contribution
===========





- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
SPURPURA



Joined: 04 Apr 2015
Posts: 68
Location: KAPV
PostPosted: Sun Feb 16, 2020 2:30 pm    Post subject: Re: what hose for expansion tank to overflow bottle? Reply with quote
Try a piece of fuel hose,14” or 5/16”, witch ever fits best.

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

_________________
N951EU - Tri-gear & 912ULS, N77EU- Mono & 914
I'D RATHER HAVE A BOTTLE IN FRONT OF ME THAN A FRONTAL LABOTAMY.
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group