Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Gloves for Poly

Matronics Email Lists Forum Index -> Kitfox-List

View previous topic :: View next topic

Author Message

occom

Joined: 26 Aug 2006
Posts: 404

Posted: Sun Dec 10, 2006 6:23 am Post subject: Gloves for Poly

I have been using the blue nitrile gloves for work  with the Hysol and with mek and such while working with my wings and such. I  have found that they seem to degrade very quickly if I get mek on the fingers. I  have a very heavy set of chemical resistant gloves made of neoprene that are  better but with much less feel. The question is what do you use? I understand  that once I get to the actual "gluing" with Polytak, I will be getting a bit of  this on my fingers and if the nitril gloves that I wear while working on my bike  aren't going to cut it, what will? 

  

 As always, please do not reply to the list. occom(at)ns.sympatico.ca (occom(at)ns.sympatico.ca)

   [quote][b]

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

aldaniels(at)fmtcblue.com
Guest

Posted: Sun Dec 10, 2006 8:22 am Post subject: Gloves for Poly

I use an invisible glove. It is a cream sold by most aircraft supply 

places that will protect you from the chemicals, but will wash off with 

water. 



Dave G. wrote:

 	  Quote: 	
		   I have been using the blue nitrile gloves for work with the Hysol and 

 with mek and such while working with my wings and such. I have found 

 that they seem to degrade very quickly if I get mek on the fingers. I 

 have a very heavy set of chemical resistant gloves made of neoprene 

 that are better but with much less feel. The question is what do you 

 use? I understand that once I get to the actual "gluing" with Polytak, 

 I will be getting a bit of this on my fingers and if the nitril gloves 

 that I wear while working on my bike aren't going to cut it, what will?

  

 As always, please do not reply to the list. occom(at)ns.sympatico.ca 

 <mailto:occom(at)ns.sympatico.ca>

 *

 *

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

Lynn Matteson

Joined: 10 Jan 2006
Posts: 2778
Location: Grass Lake, Michigan

Posted: Sun Dec 10, 2006 9:51 am Post subject: Gloves for Poly

I used the invisible gloves...when I remembered...and also some orange 

gloves that I got at Gordon Food Service, that said right on the 

package that they are impervious to MEK, among other chemicals. They 

aren't too thick to work with, I didn't feel....or actually, I DID 

feel...pun intended.



Lynn

On Sunday, December 10, 2006, at 11:21  AM, Alan Daniels wrote:



 	  Quote: 	
		   

 <aldaniels(at)fmtcblue.com>



 I use an invisible glove. It is a cream sold by most aircraft supply 

 places that will protect you from the chemicals, but will wash off 

 with water.

 Dave G. wrote:

> I have been using the blue nitrile gloves for work with the Hysol and 

> with mek and such while working with my wings and such. I have found 

> that they seem to degrade very quickly if I get mek on the fingers. I 

> have a very heavy set of chemical resistant gloves made of neoprene 

> that are better but with much less feel. The question is what do you 

> use? I understand that once I get to the actual "gluing" with 

> Polytak, I will be getting a bit of this on my fingers and if the 

> nitril gloves that I wear while working on my bike aren't going to 

> cut it, what will?

>  As always, please do not reply to the list. occom(at)ns.sympatico.ca 

> <mailto:occom(at)ns.sympatico.ca>

> *

> *

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
Lynn
Kitfox IV-Jabiru 2200
N369LM

flier(at)sbcglobal.net
Guest

Posted: Sun Dec 10, 2006 12:32 pm Post subject: Gloves for Poly

I've also used invisible glove.  Works great.  



Regards,



Ted



--

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

akflyer
Guest

Posted: Mon Dec 11, 2006 7:17 am Post subject: Re: Gloves for Poly

I have been using the Blue Nitrile gloves while covering mine.  They hold up well unless you go straight MEK, but no reason for that.  They have held up to poly tac and poly brush so far, with a bit of acetone here and there.

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

Lynn Matteson

Joined: 10 Jan 2006
Posts: 2778
Location: Grass Lake, Michigan

Posted: Mon Dec 11, 2006 8:31 am Post subject: Gloves for Poly

A followup on my post...the gloves I used were latex #8430 from Impact 

Products LLC...www.impact-products.com.



Lynn

On Monday, December 11, 2006, at 10:17  AM, akflyer wrote:



 	  Quote: 	
		   



 I have been using the Blue Nitrile gloves while covering mine.  They 

 hold up well unless you go straight MEK, but no reason for that.  They 

 have held up to poly tac and poly brush so far, with a bit of acetone 

 here and there.



 --------

 Leni

 Avid C W/582

 1260 full lotus



 .......DO NOT ARCHIVE.....





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p=80755#80755

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
Lynn
Kitfox IV-Jabiru 2200
N369LM

Display posts from previous:

	Matronics Email Lists Forum Index -> Kitfox-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum