kitfox69(at)earthlink.net
Guest
|
 Posted: Thu Feb 22, 2007 6:45 am Post subject: Floyd's trailer design #7 ( end) |
 |
|
Hi again Folks,
This segment covers the much requested tailwheel standoff. It doesn't lift the tailwheel off the surface, it only carries the weight to the trailer frame so your plane doesn't bounce on the tailwheel. I find it to be very effective. The straps are 20" long with the holes at 17" centers. The distance from the frame bolt center to the surface where the tailwheel sets is 3/4 ".
The carry thru bolt which goes thru the fuselage tube is 5 1/2 " long. I use a wingnut for ease of hookup.
The straps should be made of tempered steel. They are can be 3/4" to 1" wide by 1/4" thick. If you don't have tempered steel,
just heat the straps to cherry red and quickly quench in cold water.
This is the end of the photos. I'll gather liniar data as soon as our forcasted " fast moving snow storm" passes.
Enjoy. Regards, Floyd N69FJ
Floyd Johnson
kitfox69(at)earthlink.net (kitfox69(at)earthlink.net)
EarthLink Revolves Around You.
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
| Description: |
|
| Filesize: |
110.18 KB |
| Viewed: |
146 Time(s) |
|
| Description: |
|
| Filesize: |
116.08 KB |
| Viewed: |
148 Time(s) |
|
| Description: |
|
| Filesize: |
115.23 KB |
| Viewed: |
141 Time(s) |
|
| Description: |
|
| Filesize: |
115.81 KB |
| Viewed: |
140 Time(s) |
|
| Description: |
|
| Filesize: |
111.83 KB |
| Viewed: |
149 Time(s) |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
