 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
mike(at)vision499.com
Guest
|
 Posted: Mon Jul 06, 2015 5:33 pm Post subject: KIS logo |
 |
|
Hi,
Is there an official KIS logo or font?
What inscription do I put on the fuselage;
KIS
TR-4
Cruiser??
Thanks for the help
Mike
[quote][b]
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
| Back to top |
|
 |
Robert Reed
Joined: 22 Oct 2009
Posts: 331
Location: Dallas/Ft.Worth
|
| Posted: Mon Jul 06, 2015 6:27 pm Post subject: KIS logo |
|
|
Mike,
Despite the fact that it eventually was called a Pulsar, I have always loved the KIS Cruiser name and if I ever get off you old butt and finish mine it will get the attached Logo on it. I believe the official FAA designation is TR-4.
Bob Reed
From: mike <mike(at)vision499.com>
To: kis-list(at)matronics.com
Sent: Monday, July 6, 2015 8:33 PM
Subject: KIS-List: KIS logo
#yiv5650369950 .yiv5650369950mceResizeHandle {border:1px solid black;background:#FFF;width:5px;height:5px;}#yiv5650369950 .yiv5650369950mceResizeHandle:hover {background:#000;}#yiv5650369950 img .filtered99999 {outline:1px solid black;}#yiv5650369950 img.yiv5650369950mceClonedResizable, #yiv5650369950 table.yiv5650369950mceClonedResizable {outline:1px dashed black;}
Hi,
Is there an official KIS logo or font?
What inscription do I put on the fuselage;
KIS
TR-4
Cruiser??
Thanks for the help
Mike
| Quote: |
et="_blank" rel="nofollow">http://www.matronics.com/Navigator?KIS-List
el="nofollow">http://forums.matronics.com
_blank" rel="nofollow">http://www.matronics.com/contribution
|
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
| Description: |
|
Download |
| Filename: |
KIS_Cruiser_LOGO.DOC |
| Filesize: |
21.5 KB |
| Downloaded: |
407 Time(s) |
|
|
| Back to top |
|
|
mark_trickel
Joined: 13 Dec 2011
Posts: 101
Location: Philadelphia, PA, USA
|
| Posted: Tue Jul 07, 2015 4:22 am Post subject: Re: KIS logo |
|
|
Hello Robert, and other TR-4 fans. Pulsar may have been the last Shepard of KIS but they did not do a very good job. Previously I thought they contracted Rich while working for CS Composites (the new owner of High Tech Composites) to mold up 5 TR-4s. But recent information leads me to believe they only molded 4 TR-4 kits. One was crashed by Degani (I couldn't be happier about that one). One was sold in Germany, one went to Zizo in Brazil, and the last one was supposed to go to Australia but I think that guy got ripped off totally. Pulsar never molded any TR-1s. Degani never fully compensated Rich for the designs or the time he spent working for this directionless company, yet Degani sued Rich for taking his own airplane when he left for Brazil. God evened the score at the end of that Ilopango runway.
The type fonts used on the factroy prototype TR-4 for KIS was a italic sans serif or gothic type font. The Cruiser type font is a really old type face called Brush (this font may have other names - people change it slightly and call it something else to save paying royalties). When I printed things I used Palatino bold Italic a standard font on the MAC platform for the KIS logo. Attached is a picture off the first TR-4 brochure. It has Souvenir (a funky 70s type font) used for KIS which was the wrong font but I had trouble figuring out what the face was from the poor quality pics Rich sent me. But the Cruiser part on this pic is correct.
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
| Description: |
|
| Filesize: |
47.06 KB |
| Viewed: |
11934 Time(s) |
|
|
|
| Back to top |
|
|
galinhdz(at)gmail.com
Guest
|
| Posted: Tue Jul 07, 2015 10:37 am Post subject: KIS logo |
|
|
I know it isn't an "official" logo but I like the one Dave Tate made for SN 4052. I still have the original one inside the airplane as a testament to Dave and his work.
On Tue, Jul 7, 2015 at 8:22 AM, mark_trickel <marktrickel(at)gmail.com (marktrickel(at)gmail.com)> wrote:
| Quote: | --> KIS-List message posted by: "mark_trickel" <marktrickel(at)gmail.com (marktrickel(at)gmail.com)>
Hello Robert, and other TR-4 fans. Pulsar may have been the last Shepard of KIS but they did not do a very good job. Previously I thought they contracted Rich while working for CS Composites (the new owner of High Tech Composites) to mold up 5 TR-4s. But recent information leads me to believe they only molded 4 TR-4 kits. One was crashed by Degani (I couldn't be happier about that one). One was sold in Germany, one went to Zizo in Brazil, and the last one was supposed to go to Australia but I think that guy got ripped off totally. Pulsar never molded any TR-1s. Degani never fully compensated Rich for the designs or the time he spent working for this directionless company, yet Degani sued Rich for taking his own airplane when he left for Brazil. God evened the score at the end of that Ilopango runway.
The type fonts used on the factroy prototype TR-4 for KIS was a italic sans serif or gothic type font. The Cruiser type font is a really old type face called Brush (this font may have other names - people change it slightly and call it something else to save paying royalties). When I printed things I used Palatino bold Italic a standard font on the MAC platform for the KIS logo. Attached is a picture off the first TR-4 brochure. It has Souvenir (a funky 70s type font) used for KIS which was the wrong font but I had trouble figuring out what the face was from the poor quality pics Rich sent me. But the Cruiser part on this pic is correct.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=444504#444504
Attachments:
http://forums.matronics.com//files/kis_cruiser_prototype_166.jpg
===========
List" target="_blank" rel="noreferrer">http://www.matronics.com/Navigator?KIS-List
===========
FORUMS -
_blank" rel="noreferrer">http://forums.matronics.com
===========
b Site -
     -Matt Dralle, List Admin.
target="_blank" rel="noreferrer">http://www.matronics.com/contribution
===========
|
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
| Description: |
|
| Filesize: |
145.94 KB |
| Viewed: |
11923 Time(s) |
|
|
|
| Back to top |
|
|
mjpienaar(at)shaw.ca
Guest
|
| Posted: Tue Jul 07, 2015 8:55 pm Post subject: KIS logo |
|
|
Hello All
Thanks for the input Mark, when I Google the "Brush" font used for "Cruiser" I get something completely different so if somebody has a better indication of a font name for the Cruiser script I'd appreciate it.
Thanks again
Mike
From: "mark_trickel" <marktrickel(at)gmail.com>
To: kis-list(at)matronics.com
Sent: Tuesday, July 7, 2015 5:22:33 AM
Subject: Re: KIS logo
--> KIS-List message posted by: "mark_trickel" <marktrickel(at)gmail.com>
Hello Robert, and other TR-4 fans. Pulsar may have been the last Shepard of KIS but they did not do a very good job. Previously I thought they contracted Rich while working for CS Composites (the new owner of High Tech Composites) to mold up 5 TR-4s. But recent information leads me to believe they only molded 4 TR-4 kits. One was crashed by Degani (I couldn't be happier about that one). One was sold in Germany, one went to Zizo in Brazil, and the last one was supposed to go to Australia but I think that guy got ripped off totally. Pulsar never molded any TR-1s. Degani never fully compensated Rich for the designs or the time he spent working for this directionless company, yet Degani sued Rich for taking his own airplane when he left for Brazil. God evened the score at the end of that Ilopango runway.
The type fonts used on the factroy prototype TR-4 for KIS was a italic sans serif or gothic type font. The Cruiser type font is a really old type face called Brush (this font may have other names - people change it slightly and call it something else to save paying royalties). When I printed things I used Palatino bold Italic a standard font on the MAC platform for the KIS logo. Attached is a picture off the first TR-4 brochure. It has Souvenir (a funky 70s type font) used for KIS which was the wrong font but I had trouble figuring out what the face was from the poor quality pics Rich sent me. But the Cruiser part on this pic is correct.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=444504#444504
Attachments:
http://forums.mat========================
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
| Back to top |
|
|
mark_trickel
Joined: 13 Dec 2011
Posts: 101
Location: Philadelphia, PA, USA
|
| Posted: Wed Jul 08, 2015 5:34 am Post subject: Re: KIS logo |
|
|
Galin - Daves logo is cool, and the type faces are pretty close.
Here is a couple links to the Brush type font. I have in my files somewhere a close up picture of the TR-4 prototype logo. I will dig it out after Oshkosh. It will show the type face used for the KIS.
http://www.fontscape.com/explore?20UQ
http://designmodo.com/overused-fonts-design/
Robert - to finish my previous rant - the way I see it the only pulsar TR-4s are the one in Germany, and the Zizo's in Brazil. All others are pure KIS!
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
| Back to top |
|
|
galinhdz(at)gmail.com
Guest
|
| Posted: Thu Jul 09, 2015 2:09 pm Post subject: KIS logo |
|
|
The official ICAO and FAA designator for the TR-4 is KIS4. This is to be used for flight plans.
On Monday, July 6, 2015, Robert Reed <robertr237(at)att.net (robertr237(at)att.net)> wrote:
[quote]
Mike,
Despite the fact that it eventually was called a Pulsar, I have always loved the KIS Cruiser name and if I ever get off you old butt and finish mine it will get the attached Logo on it. I believe the official FAA designation is TR-4.
Bob Reed
From: mike <[url=javascript:_e(%7B%7D,'cvml','mike(at)vision499.com');]mike(at)vision499.com[/url]>
To: [url=javascript:_e(%7B%7D,'cvml','kis-list(at)matronics.com');]kis-list(at)matronics.com[/url]
Sent: Monday, July 6, 2015 8:33 PM
Subject: KIS-List: KIS logo
Hi,
Â
Is there an official KIS logo or font?
Â
What inscription do I put on the fuselage;
Â
KIS
Â
TR-4
Â
Cruiser??
Â
Thanks for the help
Â
Mike
[b]
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
| Back to top |
|
|
galinhdz(at)gmail.com
Guest
|
| Posted: Thu Jul 09, 2015 2:17 pm Post subject: KIS logo |
|
|
The ICAO document for all aircraft designations is at: http://www.icao.int/DOC 8643
If you go on line and search for the KIS4 and view the official photo you will see my airplane (N819PR) prominently displayed.
On Thursday, July 9, 2015, Galin Hernandez <galinhdz(at)gmail.com (galinhdz(at)gmail.com)> wrote:
[quote]The official ICAO and FAA designator for the TR-4 is KIS4. This is to be used for flight plans.
On Monday, July 6, 2015, Robert Reed <[url=javascript:_e(%7B%7D,'cvml','robertr237(at)att.net');]robertr237(at)att.net[/url]> wrote:
| Quote: |
Mike,
Despite the fact that it eventually was called a Pulsar, I have always loved the KIS Cruiser name and if I ever get off you old butt and finish mine it will get the attached Logo on it. I believe the official FAA designation is TR-4.
Bob Reed
From: mike <mike(at)vision499.com>
To: kis-list(at)matronics.com
Sent: Monday, July 6, 2015 8:33 PM
Subject: KIS logo
Hi,
Â
Is there an official KIS logo or font?
Â
What inscription do I put on the fuselage;
Â
KIS
Â
TR-4
Â
Cruiser??
Â
Thanks for the help
Â
Mike
|
[b]
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
| Back to top |
|
|
galinhdz(at)gmail.com
Guest
|
| Posted: Thu Jul 09, 2015 2:21 pm Post subject: KIS logo |
|
|
For the FAA the document is JO 7340.2A "Contractions". It is the same as ICAO Â Doc 8643.On Thursday, July 9, 2015, Galin Hernandez <galinhdz(at)gmail.com (galinhdz(at)gmail.com)> wrote:
[quote]
The ICAO document for all aircraft designations is at: http://www.icao.int/DOC 8643
If you go on line and search for the KIS4 and view the official photo you will see my airplane (N819PR) prominently displayed.
On Thursday, July 9, 2015, Galin Hernandez <[url=javascript:_e(%7B%7D,'cvml','galinhdz(at)gmail.com');]galinhdz(at)gmail.com[/url]> wrote:
| Quote: | The official ICAO and FAA designator for the TR-4 is KIS4. This is to be used for flight plans.
On Monday, July 6, 2015, Robert Reed <robertr237(at)att.net> wrote:
| Quote: |
Mike,
Despite the fact that it eventually was called a Pulsar, I have always loved the KIS Cruiser name and if I ever get off you old butt and finish mine it will get the attached Logo on it. I believe the official FAA designation is TR-4.
Bob Reed
From: mike <mike(at)vision499.com>
To: kis-list(at)matronics.com
Sent: Monday, July 6, 2015 8:33 PM
Subject: KIS logo
Hi,
Â
Is there an official KIS logo or font?
Â
What inscription do I put on the fuselage;
Â
KIS
Â
TR-4
Â
Cruiser??
Â
Thanks for the help
Â
Mike
|
|
[b]
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
| Back to top |
|
|
mark_trickel
Joined: 13 Dec 2011
Posts: 101
Location: Philadelphia, PA, USA
|
| Posted: Thu Oct 29, 2015 3:41 pm Post subject: Re: KIS logo |
|
|
Attached is the logo Rich put on the prototype KIS Cruiser TR-4. The C and the r should be moved together and connected but Rich was an airplane maker not a typographer. The airplane is still in China part of a huge deal that was never completed. Rich was well ahead of the pack with this licensing deal that was to produce both the TR-1 and TR-4 in China. The TR-4 is a certified aircraft in China - our own Mark K. did the engineering work to satisfy the Chinese certification requirements. If the deal was completed I would venture to say Tri-R Technologies would have made it at least to the economic down turn the banking system dealt to us all! Recent news from the far east is that the TR-1 has been moved to western China where they are attempting to fly it. xhu ni haoyun
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
| Description: |
|
| Filesize: |
148.17 KB |
| Viewed: |
11708 Time(s) |
|
|
|
| Back to top |
|
|
galinhdz(at)gmail.com
Guest
|
| Posted: Fri Oct 30, 2015 6:53 am Post subject: KIS logo |
|
|
NICE. I didn't know the TR-4 is a certified airplane in China. I wonder if we can somehow use that fact to our advantage.
On Thu, Oct 29, 2015 at 7:41 PM, mark_trickel <marktrickel(at)gmail.com (marktrickel(at)gmail.com)> wrote:
[quote]--> KIS-List message posted by: "mark_trickel" <marktrickel(at)gmail.com (marktrickel(at)gmail.com)>
Attached is the logo Rich put on the prototype KIS Cruiser TR-4. The C and the r should be moved together and connected but Rich was an airplane maker not a typographer. The airplane is still in China part of a huge deal that was never completed. Rich was well ahead of the pack with this licensing deal that was to produce both the TR-1 and TR-4 in China. The TR-4 is a certified aircraft in China - our own Mark K. did the engineering work to satisfy the Chinese certification requirements. If the deal was completed I would venture to say Tri-R Technologies would have made it at least to the economic down turn the banking system dealt to us all! Recent news from the far east is that the TR-1 has been moved to western China where they are attempting to fly it. xhu ni haoyun
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=448362#448362
Attachments:
http://forums.matronics.com//files/tr_4_logo_web_res_825.jpg
===========
List" target="_blank" rel="noreferrer">http://www.matronics.com/Navigator?KIS-List
===========
FORUMS -
_blank" rel="noreferrer">http://forums.matronics.com
===========
b Site -
     -Matt Dralle, List Admin.
target="_blank" rel="noreferrer">http://www.matronics.com/contribution
===========
[b]
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
| Back to top |
|
|
fredorosa(at)gmail.com
Guest
|
| Posted: Fri Oct 30, 2015 12:14 pm Post subject: KIS logo |
|
|
It wasn't an advantage to TRI-R.
The Chinese probably stole it.
Sent from my iPhone
On Oct 30, 2015, at 10:52 AM, Galin Hernandez <galinhdz(at)gmail.com (galinhdz(at)gmail.com)> wrote:
[quote]NICE. I didn't know the TR-4 is a certified airplane in China. I wonder if we can somehow use that fact to our advantage.
On Thu, Oct 29, 2015 at 7:41 PM, mark_trickel <marktrickel(at)gmail.com (marktrickel(at)gmail.com)> wrote:
| Quote: | --> KIS-List message posted by: "mark_trickel" <marktrickel(at)gmail.com (marktrickel(at)gmail.com)>
Attached is the logo Rich put on the prototype KIS Cruiser TR-4. The C and the r should be moved together and connected but Rich was an airplane maker not a typographer. The airplane is still in China part of a huge deal that was never completed. Rich was well ahead of the pack with this licensing deal that was to produce both the TR-1 and TR-4 in China. The TR-4 is a certified aircraft in China - our own Mark K. did the engineering work to satisfy the Chinese certification requirements. If the deal was completed I would venture to say Tri-R Technologies would have made it at least to the economic down turn the banking system dealt to us all! Recent news from the far east is that the TR-1 has been moved to western China where they are attempting to fly it. xhu ni haoyun
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=448362#448362
Attachments:
http://forums.matronics.com//files/tr_4_logo_web_res_825.jpg
===========
List" target="_blank" rel="noreferrer">http://www.matronics.com/Navigator?KIS-List
===========
FORUMS -
_blank" rel="noreferrer">http://forums.matronics.com
===========
b Site -
-Matt Dralle, List Admin.
target="_blank" rel="noreferrer">http://www.matronics.com/contribution
===========
|
[b]
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
| Back to top |
|
|
mark_trickel
Joined: 13 Dec 2011
Posts: 101
Location: Philadelphia, PA, USA
|
| Posted: Sat Oct 31, 2015 6:43 am Post subject: Re: KIS logo |
|
|
Galin - Not sure what advantage the Chinese certification would bring other than another feather to add to the hat. Their requirements are surely less than our own standards here in the USA. The certification may have been based on modifications that never came to be. As far as I know they never built any airplanes or even molded any parts. Mark K may known more on this subject. I do know the deal was for between $500,000 and $600,000, it included a flying TR-1, and a flying TR-4, completes sets of tooling for both aircraft, and engineering information. The deal went about two thirds of the way through, and for some reason kind of died out at that point. Either the money dried up or went to the wrong place, I just do not know.
Al - the Chinese deal was important to Tri-R, it kept the shop going for the better part of two years. And NO they did not steal anything like that bum Degani. They paid for want they got, and who knows it still may come back to life.
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
| Back to top |
|
|
aeromomentum(at)yahoo.com
Guest
|
| Posted: Sun Nov 01, 2015 8:43 am Post subject: KIS logo |
|
|
They did mold TR-4 parts and I saw a couple of partial aircraft. But I don't think any were completed. To the best of my knowledge only tooling for the TR-4 was sent to China. Last I heard the TR-1 that was sent to China was in Tibet but that was years ago.
The Chinese side (Mr. Chen) and deal broker (Mr. Steve Wang) are honest and trustworthy. I have visited both of them both in the USA and in China. Like any country there are good and there are bad.
Mark Kettering
--------------------------------------------
On Sat, 10/31/15, mark_trickel <marktrickel(at)gmail.com> wrote:
Subject: Re: KIS logo
To: kis-list(at)matronics.com
Date: Saturday, October 31, 2015, 9:43 AM
"mark_trickel" <marktrickel(at)gmail.com>
Galin - Not sure what advantage the Chinese certification
would bring other than another feather to add to the hat.
Their requirements are surely less than our own standards
here in the USA. The certification may have been based on
modifications that never came to be. As far as I know they
never built any airplanes or even molded any parts. Mark K
may known more on this subject. I do know the deal was for
between $500,000 and $600,000, it included a flying TR-1,
and a flying TR-4, completes sets of tooling for both
aircraft, and engineering information. The deal went about
two thirds of the way through, and for some reason kind of
died out at that point. Either the money dried up or went to
the wrong place, I just do not know.
Al - the Chinese deal was important to Tri-R, it kept the
shop going for the better part of two years. And NO they did
not steal anything like that bum Degani. They paid for want
they got, and who knows it still may come back to life.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=448418#448418
Forum -
- MATRONICS WEB FORUMS -
List Contribution Web Site -
-Matt
Dralle, List Admin.
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
